Make sure this part fits

Mopar 68052257AB Converter-Exhaust

2010-2012 Mopar 68052257AB

Customer Questions & Expert Answers (3)
Mopar 68052257AB Converter-Exhaust
  • Part Description
    Pipe And Converter Exhaust
  • Replaces
    68052257AA
  • Manufacturer
    Mopar
Make sure this part fits
$4672.50 MSRP: $6855.00
You Save: $2182.50 (32%)
Core Charge: $200.00
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number68052257AB
    Part DescriptionPipe And Converter Exhaust
    Other NamesCatalytic Converter, Converter & Pipe
    Item Dimensions55.7 x 29.2 x 15.9 inches
    Item Weight26.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces68052257AA
    ManufacturerMopar
    SKU68052257AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2010-2011 Dodge NitroHeat 2WD, Heat 4WD, SXT 2WD, SXT 4WD
    2010-2012 Jeep Liberty6 Cyl 3.7LLimited Edition 2WD, Limited Edition 4WD, Limited JET Edition 2WD, Limited JET Edition 4WD, Renegade 4WD, Sport 2WD, Sport 4WD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68052257AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How Can I Diagnose a Malfunctioning Catalytic Converter on Jeep Liberty? Posted by Customer
    A:
    Because of a federally mandated extended warranty which covers emissions-related components such as the catalytic converter, check with a dealer service department before replacing the converter at your own expense. The catalytic converter is an emission control device added to the exhaust system to reduce pollutants from the exhaust gas stream. A monolithic converter design is used with a three-way (reduction) catalyst. The catalytic coating on the three-way catalyst contains platinum, palladium and rhodium, which lowers the levels of oxides of nitrogen (NOx) as well as hydrocarbons (HG) and carbon monoxide (CO). The test equipment for a catalytic converter is expensive and highly sophisticated. If you suspect that the converter on your vehicle is malfunctioning, take it to a dealer or authorized emissions inspection facility for diagnosis and repair. Whenever the vehicle is raised for servicing of underbody components, check the converter for leaks, corrosion, dents and other damage. Check the welds/flange bolts that attach the front and rear ends of the converter to the exhaust system. If damage is discovered, the converter should be replaced. Although catalytic converters don't break too often, they can become plugged. The easiest way to check for a restricted converter is to use a vacuum gauge to diagnose the effect of a blocked exhaust on intake vacuum. Connect a vacuum gauge to an intake manifold vacuum source. Warm the engine to operating temperature, place the transmission in park (automatic) or neutral (manual) and apply the parking brake. Note and record the vacuum reading at idle. Open the throttle until the engine speed is about 2000 rpm. Release the throttle quickly and record the vacuum reading. Perform the test three more times, recording the reading after each test. If the reading after the fourth test is more than one in-Hg lower than the reading recorded at idle, the catalytic converter, muffler or exhaust pipes may be plugged or restricted. If the catalytic converter requires replacement, take the vehicle to a dealership service department or other qualified repair shop.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be checked when servicing underbody components for the 2009 Dodge Nitro? Posted by Customer
    A:
    Whenever the vehicle is raised for servicing of underbody components, check the converter for leaks, corrosion, dents and other damage. Check the welds/flange bolts that attach the front and rear ends of the converter to the exhaust system.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Catalytic Converter
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68052257AB, the Right Choice

To ensure reliability, purchase Mopar part # 68052257AB Converter-Exhaust. It is sometimes referred to as Mopar Catalytic Converter, Mopar Exhaust Pipe. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Dodge Nitro models. It fits Jeep Liberty.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68052257AB Converter-Exhaust. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly