Mopar 68003993AA Core-Heater

You can Select Your Vehicle to check if 68003993AA fits your vehicle.

Heater core removal is a challenging task for home mechanics. The entire instrument panel must be removed to access the heater/air conditioning unit. The battery cable should be disconnected, and the cooling system drained. The heater hoses at the firewall should be disconnected and taped or plugged. The straps securing the instrument panel to the top of the HVAC housing should be disconnected. Inside the vehicle, the electrical connector from the blower motor resistor should be disconnected, along with the electrical connector and vacuum hoses from the heater/air conditioning unit. The heater/air conditioning unit can then be removed from the interior of the vehicle. For installation, the heater core should be positioned in the housing and the screws should be installed.

For installation, the heater core should be positioned in the housing and the screws should be installed. The seal should be cemented in place to prevent movement when the blower assembly is installed. The remaining components should be reinstalled in reverse order. When installing the blower/evaporator housing, care should be taken to avoid pinching any wiring. The cooling system should be refilled, and for models with air conditioning, the system should be evacuated, recharged, and leak-tested. Finally, the engine should be started and checked for proper operation.