×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Jeep Liberty Heater Core
HVAC Heater Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Heater Cores found
Jeep Liberty Heater Core
Heater Core is even more critical to vehicles such as Jeep Liberty because it is used to whisk warm air to the cabin by using excess engine heat. Similar to a small car radiator this part is cooled by a water and anti-freeze solution as hot coolant from the engine flows through it to warm cabin air. A temperature control system, valves or doors, to control the flow of the coolant in the core for controlling the climate. further, the heater core can also serve the function of cooling the engine and dehumidification of the air in conditioned car. Still, it suffers from the challenges associated with any standard tank, such as clogging and leakage; however, increased model complexity significantly aggravates the problem since the core must be disassembled to address such difficulties.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Liberty Heater Core at great affordable prices. Moreover, all genuine Jeep Liberty Heater Core come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Liberty Heater Core Parts Questions & Experts Answers
- Q: How Difficult is Heater Core Removal for Home Mechanics on Jeep Liberty?A: Heater core removal is a challenging task for home mechanics. The entire instrument panel must be removed to access the heater/air conditioning unit. The battery cable should be disconnected, and the cooling system drained. The heater hoses at the firewall should be disconnected and taped or plugged. The straps securing the instrument panel to the top of the HVAC housing should be disconnected. Inside the vehicle, the electrical connector from the Blower Motor resistor should be disconnected, along with the electrical connector and vacuum hoses from the heater/air conditioning unit. The heater/air conditioning unit can then be removed from the interior of the vehicle. For installation, the heater core should be positioned in the housing and the screws should be installed.
