Mopar R5154492AA Rack And Pinion Gear

You can Select Your Vehicle to check if R5154492AA fits your vehicle.

Raise the front of the vehicle and support it securely on jackstands. Apply the parking brake and remove the wheels. For models with hydraulic rack-and-pinion steering gear, remove the intermediate shaft coupler pinch bolt and disconnect the power steering pressure and return lines. For models with electric power steering, disconnect the cable from the negative battery terminal and disconnect the EPS electrical connector. Detach the tie-rod ends from the steering knuckles and remove the rack and pinion mounting bolts. For models with recirculating ball rack and pinion, remove the intermediate shaft coupler pinch bolt and unscrew the power steering lines. Separate the drag link from the Pitman arm and remove the rack and pinion retaining bolts. Installation is the reverse of removal. Re-check the power steering fluid level after installation.

Unscrew the mounting bolts and lower the steering gear from the vehicle. Detach the tie-rod ends from the steering knuckles, disconnect the power steering pressure and return lines, and position a drain pan under the steering gear.