Make sure this part fits

Mopar 68034276AD Head Pkg-Engine Cylinder

2011-2014 Mopar 68034276AD

Customer Questions & Expert Answers (9)
Mopar 68034276AD Head Pkg-Engine Cylinder
  • Part Description
    Head Kit Engine Cylinder See Note For Contents
  • Replaced By
    68362014AA
  • Manufacturer
    Mopar
Make sure this part fits
$1785.15 MSRP: $2170.00
You Save: $384.85 (18%)
Core Charge: $150.00
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number68034276AD
    Part DescriptionHead Kit Engine Cylinder See Note For Contents
    Item Dimensions21.1 x 13.3 x 10.7 inches
    Item Weight54.00 Pounds
    ConditionNew
    ManufacturerMopar
    SKU68034276AD
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2014 Chrysler 2004 Cyl 2.4LLimited Sedan, LX Sedan, Touring Convertible, Touring Sedan
    2011-2014 Dodge Avenger4 Cyl 2.4LExpress, LUX, Mainstreet, SE, SXT
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68034276AD fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What components are removed after the valve cover for the 2013 Chrysler 200? Posted by Customer
    A:
    Take off the water pump pulley, air conditioning compressor, and bracket, then remove the timing chain cover and timing chain.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    How should the mating surfaces of the cylinder head and block be prepared for the 2014 Chrysler 200? Posted by Customer
    A:
    The mating surfaces of the cylinder head and block must be perfectly clean when the head is installed. Use a gasket scraper to remove all traces of carbon and old gasket material, then clean the mating surfaces with lacquer thinner or acetone.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after completing the installation for the 2009 Dodge Avenger? Posted by Customer
    A:
    Refill the cooling system, change the engine oil and filter, and rotate the crankshaft clockwise through six complete revolutions, rechecking the camshaft timing marks.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the head bolt holes for the 2011 Dodge Avenger? Posted by Customer
    A:
    Use a tap of the correct size to chase the threads in the head bolt holes, and check the cleaned head bolts for stretch.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the preparation for installing the new cylinder head for the 2017 Chrysler 200? Posted by Customer
    A:
    Ensure the mating surfaces are clean, using a gasket scraper and brake cleaner to remove any debris, and cover the lifter valley with shop rags to prevent debris from entering the engine.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before installing the head bolts for the 2009 Dodge Avenger? Posted by Customer
    A:
    Before installing the head bolts, apply a small amount of clean engine oil to the threads and hardened washers, ensuring the chamfered side of the washers faces the bolt heads.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What components should be removed after draining the fluids for the 2008 Dodge Avenger? Posted by Customer
    A:
    Remove the drivebelt, air filter housing, resonator, and intake manifolds.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the correct method for loosening the cylinder head mounting bolts for the 2016 Chrysler 200? Posted by Customer
    A:
    Loosen each cylinder head mounting bolt a quarter turn at a time until they can be removed by hand, working in reverse of the tightening sequence and storing the bolts in the cardboard holder.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68034276AD, the Right Choice

To ensure reliability, purchase Mopar part # 68034276AD Head Pkg-Engine Cylinder. It is sometimes referred to as Mopar Cylinder Head. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 200 models. It fits Dodge Avenger.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68034276AD Head Pkg-Engine Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly