Mopar 52021632AA INSULATOR-Engine Mount

You can Select Your Vehicle to check if 52021632AA fits your vehicle.

1. Remove the skidplate from below the engine compartment. 2. Remove the engine crossmember and the engine oil filter. 3. Use an engine hoist to raise the engine slightly to relieve the weight on the engine mounts and support the front axle with a floor jack. 4. Remove the engine mount through-bolts and the bolts attaching the engine mounts to the front axle assembly, then lower the front axle slightly. 5. Finally, remove the engine mount(s) from the vehicle, install the new mount(s) in the correct position within the bracket, and securely tighten the fasteners.

For 4WD models, support the front axle with a floor jack and jackstands, remove the engine skid plate, front crossmember, and bolts supporting the engine mount to the front axle. Then, remove the engine mount-to-frame support bracket through-bolt and engine support bracket bolt and nuts. Install the new engine mount onto the engine support bracket and tighten the bolts securely.