Mopar 68159767AD INSULATOR-Engine Mount

You can Select Your Vehicle to check if 68159767AD fits your vehicle.

The engine must be slightly raised to relieve the weight from the mounts.

Start by disconnecting the battery cable and raising the vehicle on jackstands. Support the engine and remove the through-bolts to detach the mount from the frame bracket and engine for 2WD models. For 4WD models, remove the skid plate, engine crossmember, and engine oil filter. Use an engine hoist to raise the engine slightly and take the weight off the mounts. Support the front axle with a floor jack and remove the engine mount through-bolts, as well as the bolts attaching the mounts to the front axle assembly and engine block. Lower the front axle slightly and remove the old mount. Install the new mount, ensuring correct positioning, and tighten the fasteners securely.

If relative movement is noted between the mount plates and the engine or frame, the engine should be lowered and the mount fasteners should be tightened.