Make sure this part fits

Mopar 5085887AF Front Steering Knuckle

2009-2014 Mopar 5085887AF

Customer Questions & Expert Answers (5)
Mopar 5085887AF Front Steering Knuckle
  • Part Description
    Knuckle-Front
  • Position
    Driver Side
  • Replaces
    5085887AD, 5085887AC, 5085887AE
  • Manufacturer
    Mopar
Make sure this part fits
$364.10 MSRP: $556.00
You Save: $191.90 (35%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number5085887AF
    Part DescriptionKnuckle-Front
    Other NamesKnuckle
    Item Dimensions12.7 x 8.9 x 5.1 inches
    Item Weight11.30 Pounds
    PositionDriver Side
    ConditionNew
    Replaces5085887AD, 5085887AC, 5085887AE
    ManufacturerMopar
    SKU5085887AF
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2014 Chrysler 2004 Cyl 2.4L, 6 Cyl 3.6LLX Convertible, LX Sedan, Limited Convertible, Limited Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan
    2009-2010 Chrysler Sebring4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan
    2009-2014 Dodge Avenger4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 3.6LExpress, Heat, LUX, Mainstreet, R/T FWD, SE, SXT, SXT Plus
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5085887AF fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove and install a steering knuckle on Dodge Avenger? Posted by Customer
    A:
    The steering knuckle is not a repairable component; it must be replaced if it is damaged in any way. To remove the steering knuckle, start by loosening the wheel lug nuts and the driveaxle/hub nut. Then, raise the vehicle and support it on jackstands. Remove the wheel, driveaxle/hub nut, brake disc, and ABS front wheel speed sensor. Detach the tie-rod end from the steering knuckle and separate the balljoint from the control arm. Remove the steering knuckle-to-strut bolt(s), noting their direction. On 2014 and earlier models, if the strut assembly is attached to the steering knuckle using a cam bolt in the lower slotted hole, mark the relationship of the cam bolt to the strut to preserve the wheel alignment setting on reassembly. Finally, remove the steering knuckle from the strut, separate the driveaxle from the hub splines, and suspend it safely aside. To install the steering knuckle, follow the reverse of the removal steps. Tighten all suspension fasteners, install the wheel, lower the vehicle, and tighten the lug nuts. Lastly, have the front end alignment checked and adjusted if necessary.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be noted when removing the steering knuckle-to-strut bolt(s) for the 2011 Chrysler 200? Posted by Customer
    A:
    Note the direction of the steering knuckle-to-strut bolt(s). If the strut assembly is attached using a cam bolt in the lower slotted hole, mark the relationship of the cam bolt to the strut to preserve the wheel alignment setting on reassembly for 2014 and earlier models.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What additional step is required for the 2011 Chrysler 200? Posted by Customer
    A:
    For AWD models, the driveaxle/hub nut should be removed, and the driveaxle outer joint splines should be freed from the hub.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the stabilizer bar link during suspension and knuckle removal for the 2014 Dodge Avenger? Posted by Customer
    A:
    The stabilizer bar link should be disconnected from the lower control arm.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5085887AF, the Right Choice

To ensure reliability, purchase Mopar part # 5085887AF Front Steering Knuckle. It is sometimes referred to as Mopar Steering Knuckle. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 200, Sebring models. It fits Dodge Avenger.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5085887AF Front Steering Knuckle. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly