Mopar 5183202AB Fuel Pump/Level Unit Module

You can Select Your Vehicle to check if 5183202AB fits your vehicle.

To remove the sending unit, press the fuel level sending unit snap tab to the left while gently pushing up on the bottom of the sending unit. Release the snap tab and slide the sending unit off the fuel pump module.

Inspect the pump inlet strainer for cleanliness and any damage, cleaning it if necessary. Verify that the rubber O-ring groove is clean, and replace the O-ring if damaged. On AWD models, reconnect the internal fuel line to the bottom of the module, then carefully reinstall the module into the tank with proper positioning and the locating lug seated. Finally, align the marks and securely tighten the fuel pump module lock ring during installation. If the special tool is unavailable, alternative locking methods can be used.