Mopar 68060545AA Fuel Pump Module/Level Unit

You can Select Your Vehicle to check if 68060545AA fits your vehicle.

To begin the removal process, relieve the fuel system pressure and disconnect the battery's negative terminal. Then, disconnect the electrical connector and fuel delivery line quick-connect fitting from the primary module. Before removing the primary fuel pump module, cap the module fuel line fitting and create alignment marks on the assembly and fuel tank for correct realignment during reinstallation. Use a special service tool or a brass drift to loosen the lock ring securing the fuel pump module and lift the assembly carefully from the fuel tank, ensuring the float arm of the fuel level sending unit and fuel pump inlet strainer remain undamaged. Be prepared for fuel spillage from the reservoir when removing the module.

Using a narrow electrical connector terminal tool, dislodge the sending unit terminals from the connector body, then install the terminals of the new sending unit into the correct positions in the connector. The remaining steps for installation are the reverse of removal.