Make sure this part fits

Mopar 4792963AD Pan-Oil

2008 Mopar 4792963AD

Customer Questions & Expert Answers (10)
Mopar 4792963AD Pan-Oil
  • Part Description
    Pan Oil
  • Replaced By
    4792963AE
  • Manufacturer
    Mopar
Make sure this part fits
$301.18 MSRP: $445.00
You Save: $143.82 (33%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number4792963AD
    Part DescriptionPan Oil
    Item Dimensions21.0 x 13.1 x 9.7 inches
    Item Weight11.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4792963AD
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008 Chrysler 3006 Cyl 3.5LLimited AWD, Touring AWD
    2008 Dodge Charger6 Cyl 3.5LBase AWD, SXT AWD
    2008 Dodge Magnum6 Cyl 3.5LSXT AWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4792963AD fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the correct procedure for tightening the oil pan fasteners for the 2007 Chrysler 300? Posted by Customer
    A:
    Lift the pan into position, making sure not to disturb the gasket, install several bolts finger-tight, and check for any gasket sticking out around the block's perimeter. Once all bolts are in place, install the oil pan nuts onto the studs and tighten the fasteners following the correct torque sequence.
    Posted by MoparPartsGiant Specialist
    Q:
    What components should be removed after connecting the engine hoist for the 2009 Chrysler 300? Posted by Customer
    A:
    Remove the engine splash shield, drain the engine oil, and remove the oil filter.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the 2005 Chrysler 300 be prepared before working on the oil pan? Posted by Customer
    A:
    Apply the parking brake and block the rear wheels. Then, raise the front of the vehicle and place it securely on jackstands.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    Are there any additional components to be removed before taking off the oil pan for the 2006 Dodge Charger? Posted by Customer
    A:
    Yes, remove the transmission-to-oil pan support brace at the rear of the pan. Detach any clips securing the transmission oil cooler lines that would interfere with removal of the oil pan. Also, remove the lower bolt securing the air conditioning compressor to the oil pan and the bolt securing the alternator bracket to the oil pan.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What should be done if the oil pan is distorted for the 2007 Dodge Charger? Posted by Customer
    A:
    If the oil pan is distorted, straighten the flange and wipe the gasket surfaces clean with lacquer thinner or acetone.
    Posted by MoparPartsGiant Specialist
    Q:
    What safety measures should be taken when raising the 2006 Dodge Charger and working underneath it? Posted by Customer
    A:
    Raise the front of the vehicle securely on jackstands, apply the parking brake, and block the rear wheels.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the final steps after reinstalling the power steering gear for the 2008 Dodge Magnum? Posted by Customer
    A:
    The remaining steps are the reverse of the removal procedure. Refill the engine with oil, replace the filter, run it until normal operating temperature is reached, and check for leaks.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    How should the oil pan fasteners be tightened during installation for the 2008 Dodge Magnum? Posted by Customer
    A:
    Lower the engine and secure the engine mount nuts, then install the oil pan-to-transmission bolts and tighten them. Tighten the oil pan fasteners following a criss-cross pattern in three steps, including the small Allen bolts at the rear.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the oil pan is distorted for the 2008 Dodge Magnum? Posted by Customer
    A:
    If the oil pan is distorted, straighten the flange and wipe the gasket surfaces clean with lacquer thinner or acetone.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4792963AD, the Right Choice

To ensure reliability, purchase Mopar part # 4792963AD Pan-Oil. It is sometimes referred to as Mopar Oil Pan. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models. It fits Dodge Charger, Magnum.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4792963AD Pan-Oil. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly