Make sure this part fits

Mopar MD157740

1991 Mopar MD157740

Customer Questions & Expert Answers (5)
Mopar MD157740
  • Manufacturer
    Mopar
Make sure this part fits
$25.22 MSRP: $32.59
You Save: $7.37 (23%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part NumberMD157740
    ManufacturerMopar
    SKUMD157740
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1991 Chrysler Imperial6 Cyl 3.0L
    1991 Chrysler LeBaron6 Cyl 3.0L
    1991 Chrysler New Yorker6 Cyl 3.0L
    1991 Chrysler TC Maserati6 Cyl 3.0L
    1991 Chrysler Town & Country
    1991 Dodge Caravan6 Cyl 3.0L
    1991 Dodge Daytona6 Cyl 3.0L
    1991 Dodge Dynasty6 Cyl 3.0L
    1991 Dodge Grand Caravan6 Cyl 3.0L
    1991 Dodge Spirit6 Cyl 3.0L
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if MD157740 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How can you determine if the injector is operating smoothly for the 1993 Chrysler Imperial? Posted by Customer
    A:
    With the engine running or cranking, listen to the sound from the injector with an automotive stethoscope or by touching the area of the throttle body above the fuel injector with your finger.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    How do you replace an injector for the 1990 Chrysler Imperial? Posted by Customer
    A:
    Remove the fuel rail assembly and place the fuel rail assembly on a clean work surface so the fuel injectors are accessible. Remove the injector lock ring from the fuel rail and injector by prying it off with a small screwdriver. Pull the injector straight out of the receiver cup. Inspect the injector O-rings for damage. Replace them with new ones if necessary (Push the new O-ring over the tip of the injector and into the groove Insert a small screwdriver under the 0-ring and pry it off - be careful not to damage the injector tip). Prior to installation, lubricate the O-rings with a light film of clean engine oil. Push the top of the injector straight into the fuel rail receiver cup, taking care not to damage the O-ring. Slide the open end of the injector clip into the top slot of the injector, onto the receiver cup ridge and into the side slots of the clip. Install the fuel rail.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    How do you replace an injector for the 1992 Dodge Grand Caravan? Posted by Customer
    A:
    Remove the fuel rail assembly and place the fuel rail assembly on a clean work surface so the fuel injectors are accessible. Remove the injector lock ring from the fuel rail and injector by prying it off with a small screwdriver. Pull the injector straight out of the receiver cup. Inspect the injector O-rings for damage. Replace them with new ones if necessary (Push the new O-ring over the tip of the injector and into the groove Insert a small screwdriver under the 0-ring and pry it off - be careful not to damage the injector tip). Prior to installation, lubricate the O-rings with a light film of clean engine oil. Push the top of the injector straight into the fuel rail receiver cup, taking care not to damage the O-ring. Slide the open end of the injector clip into the top slot of the injector, onto the receiver cup ridge and into the side slots of the clip. Install the fuel rail.
    Posted by MoparPartsGiant Specialist
    Q:
    How can you determine if the injector is operating smoothly for the 2008 Dodge Grand Caravan? Posted by Customer
    A:
    With the engine running or cranking, listen to the sound from the injector with an automotive stethoscope or by touching the area of the throttle body above the fuel injector with your finger.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Injector
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part MD157740, the Right Choice

To ensure reliability, purchase Mopar part # MD157740. It is sometimes referred to as Mopar Fuel Injector. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Imperial, LeBaron, Town & Country models. It fits Dodge Caravan, Daytona, Grand Caravan.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar MD157740. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly