Mopar 5037794AC Support-Engine Mount

You can Select Your Vehicle to check if 5037794AC fits your vehicle.

There are three powertrain mounts in this system. There are left and right engine mounts attached to the engine block and the subframe, and a rear mount attached to the transmission and the frame.

Lower the engine and install the engine mount nuts, then torque them to the specifications.

Lower the engine and tighten the mount fasteners.

For replacement, follow these steps: Disconnect the cable from the negative terminal of the battery. Raise the vehicle and support it securely on jackstands (if not already done). Position a jack under the engine oil pan with a large wood block between the jack head and the oil pan. If you're removing the right side engine mount, remove the alternator support bracket. Remove the engine mount-to-subframe nuts and raise the engine with the jack. Remove the mount-to-engine bracket bolts. Install the new mount, making sure it is correctly positioned in the bracket. Install the fasteners and tighten them securely.

The middle engine splash shield and the nuts holding the engine mounts to the subframe need to be removed.

Remove the middle engine splash shield.