Mopar 5037831AA Valve-PCV

You can Select Your Vehicle to check if 5037831AA fits your vehicle.

The Positive Crankcase Ventilation (PCV) system is essential for reducing hydrocarbon emissions by scavenging crankcase vapors rich in unburned hydrocarbons. The PCV valve regulates gas flow into the intake manifold based on intake vacuum levels. Inspection and maintenance of the PCV system are crucial, and specific locations of PCV valves for different engines are provided. A clogged or leaking PCV hose can cause various issues, including rough idle, stalling, low or high idle speed, oil leaks, or sludge in the engine. To check the PCV system's functionality, disconnect the crankcase ventilation hose and verify vacuum presence using a vacuum gauge. If vacuum is present, the system is operating correctly; otherwise, inspect for blockages, leaks, or engine blow-by. If the system is functioning correctly but engine oil is found in the throttle body or air filter housing, excessive crankcase pressure might be the cause, warranting a crankcase pressure test. Excessive blow-by, caused by worn components or constant heavy loads, can lead to sludge deposits or oil dilution, necessitating further investigation and resolution of the underlying issues.

Remove the valve and shake it, listening for a rattle. If it doesn't rattle, it's clogged and must be replaced.

The PCV valve regulates the flow of gases into the intake manifold based on intake vacuum. At idle, the PCV valve restricts vapor flow to prevent engine issues, while during throttle plate opening, it allows more vapor flow.

On V6 engines, you need to detach the hose from the valve and then unscrew the valve from either the upper intake manifold (for 2.7L engine) or the right valve cover (for 3.5L engine). On 3.6L engines, the valve is secured to the rear of the right valve cover with screws. Note that the number of screws used may vary.

Remove the valve and shake it, listening for a rattle. If it doesn't rattle, it's clogged and must be replaced.

The PCV valve's location varies by engine type, and specific removal and installation steps are outlined for different engine configurations. It is important to ensure proper function and sealing to maintain engine performance.

During engine servicing, it is important to inspect the PCV system hoses for damage and clogs.

The PCV system is essential for reducing hydrocarbon emissions by scavenging crankcase vapors rich in unburned hydrocarbons.

Detach the hose from the valve, then unscrew the valve from the upper intake manifold (2.7L engine) or the right valve cover (3.5L engine).