Mopar 5148506AC Battery Positive Cable

You can Select Your Vehicle to check if 5148506AC fits your vehicle.

Take them with you when buying new cables to ensure identical parts. Clean the threads of the solenoid or ground connection with a wire brush to remove rust and corrosion. Apply a light coat of battery terminal corrosion inhibitor or petroleum jelly to the threads to prevent future corrosion. Attach the cable to the solenoid or ground connection and tighten the mounting nut/bolt securely. Before connecting a new cable to the battery, make sure that it reaches the battery post without having to be stretched. Connect the positive cable first, followed by the negative cable.

Always disconnect the cable from the negative battery terminal first and hook it up last to avoid accidentally shorting the battery. Even if you're only replacing the cable for the positive terminal, always disconnect the cable from the negative battery terminal first.

Trace each of them to their opposite ends and detach them from the starter solenoid and ground terminals. Note the routing of each cable to ensure correct installation. If a cable is bundled with another wiring harness, cut the electrical tape tying them together, remove any protective sheathing, and separate them.

Inspect the entire length of each battery cable for damage, cracked or burned insulation, and corrosion. Check the cable-to-terminal connections at the ends of the cables for cracks, loose wire strands, and corrosion. Check the terminals for distortion, missing mounting bolts, and corrosion.