Genuine Chrysler Imperial MAP Sensor

Manifold Air Pressure Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

  • Chrysler Imperial MAP Sensor - 5234024
    Diagram for Chrysler Imperial MAP Sensor - 5234024
    View related parts

    Chrysler Imperial Sensor-Map

    Part Number: 5234024
    $79.48 MSRP: $105.15
    You Save: $25.67 (25%)
    ADD TO CART
    Product Specifications
    • Other Name: Sensor, M.A.P.,(Insul, 4638998); M.A.P. Sensor, Map Sensor
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 1990-1993 Chrysler Imperial | Base | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
  • Chrysler Imperial MAP Sensor - 4638256
    Diagram for Chrysler Imperial MAP Sensor - 4638256
    View related parts
    Product Specifications
    • Other Name: Map Sensor, Turbo
    • Replaced by: 5014762AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 1990 Chrysler Imperial | 6 Cyl 3.3L

Chrysler Imperial MAP Sensor

The MAP Sensor used in Chrysler Imperial cars is one of the most important systems which measures the positive air pressure that is actually supplied to the intake manifold. It sends signals to the ECU so as to allow it control the fuel injectors depending on the volumes of airs in the cylinders so that to have the right proportion of air and fuel in combustion. Even Chrysler Imperial pickup trucks may have different kind of MAP Sensor depending on the type of engine, whether it is naturally aspirated or if it uses forced induction such as turbo or super charger. Now, naturally aspirated engines may use either a MAP Sensor of a mass airflow (MAF) sensor but to get an enhanced performance on forced induction engines, both of them are usually installed. Since the MAP Sensor can measure real pressures as mentioned above, it becomes important in the Chrysler Imperial vehicles in the fuel metering, ignition period among other aspects of the engine.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Imperial MAP Sensor at great affordable prices. Moreover, all genuine Chrysler Imperial MAP Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Imperial MAP Sensor Parts Questions & Experts Answers

  • Q: How to Replace the Camshaft Position Sensor,Coolant Temperature Sensor,Knock Sensor,MAP Sensor,Oxygen Sensor,Speed Sensor and Throttle Position Sensor on Chrysler Imperial?
    A: To remove the camshaft reference sensor on 3.3L and 3.8L models, detach the sensor lead, loosen the bolt, and remove the sensor. If reusing, clean the sensor face and replace the spacer and O-ring. To install a new sensor, ensure it has a paper spacer and mount the O-ring. For the charge temperature sensor, unplug the connector, replace the sensor, and secure it with tape. For the coolant sensor, replace the cap, and the sensor, and check the coolant level. For the crankshaft sensor, unplug the connector, loosen the bolt, remove the sensor, and replace the spacer if reusing. For the TPS, check resistance readings, and replace if it is incorrect.

Related Chrysler Imperial Parts