×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Chrysler Imperial Parking Brake Cable
Emergency Parking Brake Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Parking Brake Cables found
Chrysler Imperial Parking Brake Cable
The Parking Brake Cable is another important component found in the Chrysler Imperial cars, especially in the parking break system since it helps to ensure that the vehicle is fixed in position especially when parked at an area with a given slope. This cable links the parking brake also known as the emergency or the handbrake to all the rest of the braking mechanism and thus is a safety factor. Chrysler Imperial Parking Brake Cables may come in different types or style through the years and the changes are mainly focused on its components and materials used. When the Parking Brake Cable is Worn or Stretched it causes a poor engagement of the parking brake, and a total failure will render the system useless and dangerous. It is imperative to perform annual lubrication of the parking brake Parking Brake Cable in order to realise it's intended ability to prevent hazardous incidences occasioned by vehicle roll away.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Imperial Parking Brake Cable at great affordable prices. Moreover, all genuine Chrysler Imperial Parking Brake Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler Imperial Parking Brake Cable Parts Questions & Experts Answers
- Q: How to remove and install parking brake cables on Chrysler Imperial?A: Raise the rear of the vehicle and support it securely on jack-stands. Working under the vehicle, loosen the adjusting nut until there's slack in the cables. Detach the rear end of the front cable from the connector that attaches it to the middle cable. From inside the vehicle, remove the driver's side kick panel. Pull up the forward end of the front cable and disconnect it. Pinch the cable retainer with needle-nose pliers and pull it down through the cable retaining bracket. Pull the cable assembly through the grommet in the hole in the floor. Installation is the reverse of removal. Adjust the parking brake. Remove the rear wheels and the hub/drum assemblies. Back off the equalizer adjusting nut until the cable is slack. Disconnect the rear brake cable from the brake shoe lever. Locate the retainer at the end of the rear cable, where it enters the brake shoe backing plate. Pinch this retainer with pliers and pull the retainer through the backing plate. Remove the cable lock from the brake cable support bracket on the trailing arm and detach the cable from the trailing arm assembly. Disconnect the rear brake cable from the connector at the end of the middle cable. The above procedure also applies to the other rear cable. Installation is the reverse of removal. Adjust the parking brake. Remove the caliper and Brake Disc. Disconnect the parking brake cable from the lever on the parking brake shoe. Compress the retainer on the end of the cable housing with pliers or a hose clamp and feed the cable through the retaining hole in the adapter. Remove the parking brake cable clip at the cable support bracket and remove the cable from the vehicle. The above procedure also applies to the other rear cable. Installation is the reverse of removal.
