Genuine Chrysler Laser Weather Strip

Door Weatherstripping
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Weather Strip found

  • Chrysler Laser Weather Strip - 4396060
    Diagram for Chrysler Laser Weather Strip - 4396060
    View related parts
    Product Specifications
    • Other Name: WEATHERSTRIP, Door Opening Drip; Drip Weatherstrip, Weatherstrip
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 1985-1986 Chrysler Laser | 4 Cyl 2.2L, 4 Cyl 2.5L

Chrysler Laser Weather Strip

The Weather Strip of Chrysler Laser cars is thus a very important part since it closes various spaces round doors, windows, and any other orifice so that water and dirt cannot find their way into the interior part of the car. This sealing mechanism is critical to the ride comfort and energy consumption of the vehicle. Usually produced using various kinds of rubber or silicon, Chrysler Laser Weather Strip has been engineered to endure temperature fluctuations and auto fluids. Different models of Chrysler Laser have incorporated various forms of Weather Strip over the years with the differences mainly being the kind of material used in making it as well as the various additions in its design. Such variations make it is easier to achieve the optimal sealing and reduction of noise in the building. It is necessary to perform an inspection and replacement of Weather Strip frequently due to the fact that damage or wear of the part is likely to cause water leakage and heightened cabin noise levels, which would compromise the further use of the vehicle.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Laser Weather Strip at great affordable prices. Moreover, all genuine Chrysler Laser Weather Strip come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Laser Weather Strip Parts Questions & Experts Answers

  • Q: How should weatherstripping be maintained and replaced on Chrysler Laser?
    A: The weatherstripping should not come into contact with contaminants such as gasoline or oil, and mineral or silicone lubricant should be applied periodically to prolong the life of they weatherstripping by reducing abrasion, wear and cracking. They are sealed to the doors by adhesive above the vehicle belt line and by clips below the line. To take it off, the bottom is fitted with a small black plastic toggle-flip this and then detach the strip by pulling, starting at the edge of the door and working your way around. Remove any leftover adhesive, or weatherstripping from the channel which may hinder the installation of the remaining weatherstripping. At last, it is necessary to put on the upper part of the door some thin layer of an appropriate adhesive and then insert the new weatherstripping until each of the clips is fastened.

Related Chrysler Laser Parts