Where is the back-up light switch located and how do you replace it on Chrysler PT Cruiser?

The back-up light switch is mounted on the top part of the transaxle. To remove it, pull the 12mm nut-and-screw terminal off the switch and then remove the switch from the case. Clean and dry the threads of the new switch and then cover them with the Teflon tape if none is available use any material that is equivalent to it before proceeding to tightening the new switch. After that, join the electrical connector back again and test the working of the back-up lights.

Genuine Chrysler PT Cruiser Back Up Light Switch

Reverse Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Back Up Light Switches found

View related parts
Chrysler PT Cruiser Switch-Back Up Lamp
Part Number: 4864775
$47.95 MSRP: $70.65
You Save: $22.70 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch Back Up Lamp; Back-Up Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2009 Chrysler PT Cruiser | Base, Base Convertible, Limited, LX, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Switch-Electric Back Light
Part Number: 4671670AB
$36.77 MSRP: $63.35
You Save: $26.58 (42%)
ADD TO CART
Product Specifications
- Other Name: Switch Electric Back Light; Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
View related parts
Chrysler PT Cruiser Switch-Back Up Lamp
Part Number: 5083756AA
$197.14 MSRP: $297.00
You Save: $99.86 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch Back Up Lamp; Back-Up Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Chrysler PT Cruiser | GT, GT Convertible, Limited, Touring, Touring Convertible | 4 Cyl 2.4L

Chrysler PT Cruiser Back Up Light Switch

They all know about the Back Up Light Switch in Chrysler PT Cruiser cars which in fact works to make the electric circuit full to turn on the reverse light if the automobile is in the back gear arrangement. This switch works in such a way that it completes the circuit by providing electric current from the power supply and to the reverse lights and in order to have visibility when one is reversing, they light up. The way of the Back Up Light Switch operation may slightly differ in the case of particular model of Chrysler PT Cruiser and type of transmissions - mechanical or hydraulic. Several years later, it is possible to encounter different designs of the Back up Light Switch in Chrysler PT Cruiser, related to the changes in styling or technology. These variations mainly depend on the kind of actuation mechanisms which may affect the dependability of the reverse light turning on or off. On the whole, it can be asserted that the Back Up Light Switch offers an important role in the Chrysler PT Cruiser car to ensure safety and provide proper operation.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler PT Cruiser Back Up Light Switch at great affordable prices. Moreover, all genuine Chrysler PT Cruiser Back Up Light Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler PT Cruiser Back Up Light Switch Parts Questions & Experts Answers

Switch-Back Up Lamp
5083756AA
Q: Where is the back-up light switch located and how do you replace it on Chrysler PT Cruiser?
A: The back-up light switch is mounted on the top part of the transaxle. To remove it, pull the 12mm nut-and-screw terminal off the switch and then remove the switch from the case. Clean and dry the threads of the new switch and then cover them with the Teflon tape if none is available use any material that is equivalent to it before proceeding to tightening the new switch. After that, join the electrical connector back again and test the working of the back-up lights.