How to Remove and Install a Fuel Pump/Fuel Pressure Regulator/Fuel Level Sending Unit Assembly on a Chrysler Sebring?

All wheel drive (AWD) models have a saddle fuel tank configuration and have main and auxiliary fuel pumps. Each fuel pump has a sending unit. The auxiliary fuel pump contains the fuel pump reservoir, fuel pressure regulator and fuel filter. Relieve the fuel system pressure. Disconnect the negative battery cable from the remote ground terminal or battery. Remove the rear seat cushion and fuel pump module cover. On AWD models, remove main and auxiliary fuel pump module covers. Disconnect the fuel delivery line quick-connect fitting and on 2015 and later models, also disconnect the fuel vapor line from the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly. Disconnect the electrical connector from the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly. Before removing the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly, make alignment marks on the assembly and the fuel tank (if marks don't already exist), to ensure the assembly will be correctly realigned when it's installed again. Using adjustable-joint pliers, loosen the lock ring that secures the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly. Carefully lift the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly from the fuel tank. Angle the module so that you don't bend the float arm of the Fuel Level Sensor or damage the fuel pump inlet strainer. If you're removing the auxiliary pump on an AWD model, raise the fuel pump module and disconnect the internal fuel line. While the pump is removed, inspect the pump inlet strainer. Make sure that it's not clogged or damaged. If the inlet strainer is dirty, try washing it in clean solvent. If it's still clogged, replace it. Installation is the reverse of removal. Line up the marks, and tighten the fuel pump module lock ring securely.

Genuine Chrysler Sebring Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Fuel Level Sensors found

View related parts
Chrysler Sebring Level Unit Module Kit
Part Number: 68042937AA
$88.82 MSRP: $147.00
You Save: $58.18 (40%)
ADD TO CART
Product Specifications
- Other Name: Module-Level Unit; Fuel Gauge Sending Unit, Level Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | Limited Sedan, LX Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring Fuel Pump/Level Unit Module Kit
Part Number: 4897804AC
$46.58 MSRP: $325.00
You Save: $278.42 (86%)
ADD TO CART
Product Specifications
- Other Name: MODUL Kit-Fuel PUMP/LEVEL Unit; Fuel Pump
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Sebring | JX, JXi | 6 Cyl 2.5L
View related parts
Chrysler Sebring Fuel Pump Module Assembly
Part Number: 68033083AB
$321.20 MSRP: $490.00
You Save: $168.80 (35%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68033083AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | Limited Sedan, LX Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring Fuel Pump Module Assembly-And Level Sensor Module
Part Number: 68004936AC
$420.66 MSRP: $619.00
You Save: $198.34 (33%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68004936AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Fuel Pump Module/Level Unit
Part Number: 68004475AB
$417.24 MSRP: $612.00
You Save: $194.76 (32%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 68004475AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Fuel Gauge Tank Float Level Sending Unit
Part Number: 5093458AA
$73.94 MSRP: $94.09
You Save: $20.15 (22%)
ADD TO CART
Product Specifications
- Other Name: Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan, Touring Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Fuel Pump Module/Level Unit
Part Number: 5093457AB
$229.25 MSRP: $293.00
You Save: $63.75 (22%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit; Fuel Pump, Fuel Pump Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Convertible, Touring Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Fuel Level Unit Kit
Part Number: 5093456AB
$92.49 MSRP: $107.00
You Save: $14.51 (14%)
ADD TO CART
Product Specifications
- Other Name: Level Uni-Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, Touring Convertible, Touring Sedan, TSI Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L
View related parts
Chrysler Sebring Fuel Gauge Sending Unit
Part Number: 4897865AB
Product Specifications
- Other Name: Level Unit Kit Fuel; Sending Unit, Tank Gauge
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Level Unit Module Kit
Part Number: 68042934AB
Product Specifications
- Other Name: Module-Level Unit; Fuel Gauge Sending Unit, Level Sensor
- Replaces: 68042934AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | LX Convertible, LX Sedan, Limited Convertible, Limited Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Fuel Gauge Tank Float Level Sending Unit
Part Number: 1718A012
Product Specifications
- Other Name: LEVL Unit-Fuel Tank; Sending Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler Sebring | Base, Limited | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chrysler Sebring Fuel Level Unit Kit
Part Number: 5018694AA
Product Specifications
- Other Name: Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001 Chrysler Sebring | Limited Convertible, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L
View related parts
Chrysler Sebring Fuel Pump Module/Level Unit
Part Number: 5093455AA
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Sebring | GTC Convertible, Limited Convertible, LX Convertible, LX Sedan, LXi Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L
View related parts
Chrysler Sebring Fuel Tank Sending Unit
Part Number: 5093456AA
Product Specifications
- Other Name: Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Sedan, Touring Convertible, Touring Sedan, TSI Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L
View related parts
Chrysler Sebring Fuel Pump Module/Level Unit
Part Number: 5093457AA
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Sebring | GTC Convertible, Limited Convertible, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Fuel Tank Level Unit
Part Number: MB863961
Product Specifications
- Other Name: Gauge Unit, Tank
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chrysler Sebring | LX, LXi | 4 Cyl 2.0L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Fuel Gauge Sending Unit
Part Number: MR241078
Product Specifications
- Other Name: Gauge Unit, Fuel Tank; Gauge Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1998 Chrysler Sebring | LX, LXi | 4 Cyl 2.0L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Fuel Level Unit
Part Number: MR978154
Product Specifications
- Other Name: Levl Unit-Fuel; Sending Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Chrysler Sebring | Base, Limited, LX | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chrysler Sebring Fuel Tank Sending Unit
Part Number: 5018694AB
Product Specifications
- Other Name: Level Unit Kit Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Chrysler Sebring | GTC Convertible, Limited Convertible, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L
View related parts
Chrysler Sebring Fuel Tank Sending Unit
Part Number: 68042934AA
Product Specifications
- Other Name: Level Unit Package Fuel
- Replaced by: 68042934AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L

| Page 1 of 2 |Next >

1-20 of 23 Results

Chrysler Sebring Fuel Level Sensor

Fuel Level Sensor involved in Chrysler Sebring cars plays a fundamental role of indicating the level of fuel remaining within the tank so that the driver is well informed when to refill the tank. This stays well under heat, which is an important feature for such an electronic device, and requires and is easily calibrated to consume little power. Generally installed in the fuel tank, Chrysler Sebring fuel level sensor comprises of a float, actuating rod and resistor that has the responsibility of transmitting correct signals to the fuel gauge. There may be changes in appearance from one model year to another, but the actual system of operation will not waver thus improving reliability. It is essential for the Fuel Level Senor to work properly because if not, it will give wrong signals and a car owner will feel like he needs to service his car.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Sebring Fuel Level Sensor at great affordable prices. Moreover, all genuine Chrysler Sebring Fuel Level Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Sebring Fuel Level Sensor Parts Questions & Experts Answers

Level Unit Module Kit
68042937AA
Q: How to Remove and Install a Fuel Pump/Fuel Pressure Regulator/Fuel Level Sending Unit Assembly on a Chrysler Sebring?
A: All wheel drive (AWD) models have a saddle fuel tank configuration and have main and auxiliary fuel pumps. Each fuel pump has a sending unit. The auxiliary fuel pump contains the fuel pump reservoir, fuel pressure regulator and fuel filter. Relieve the fuel system pressure. Disconnect the negative battery cable from the remote ground terminal or battery. Remove the rear seat cushion and fuel pump module cover. On AWD models, remove main and auxiliary fuel pump module covers. Disconnect the fuel delivery line quick-connect fitting and on 2015 and later models, also disconnect the fuel vapor line from the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly. Disconnect the electrical connector from the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly. Before removing the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly, make alignment marks on the assembly and the fuel tank (if marks don't already exist), to ensure the assembly will be correctly realigned when it's installed again. Using adjustable-joint pliers, loosen the lock ring that secures the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly. Carefully lift the fuel pump/fuel pressure regulator/Fuel Level Sensor assembly from the fuel tank. Angle the module so that you don't bend the float arm of the Fuel Level Sensor or damage the fuel pump inlet strainer. If you're removing the auxiliary pump on an AWD model, raise the fuel pump module and disconnect the internal fuel line. While the pump is removed, inspect the pump inlet strainer. Make sure that it's not clogged or damaged. If the inlet strainer is dirty, try washing it in clean solvent. If it's still clogged, replace it. Installation is the reverse of removal. Line up the marks, and tighten the fuel pump module lock ring securely.