Where is the Battery Temperature Sensor Located on Chrysler Town & Country?

The battery temperature sensor is on the battery tray. To access it, remove the battery and lift up a flap on the floor of the battery tray. It is secured to the tray with a pair of locking tabs. Squeeze the tabs together, lift up the flap, pull the sensor up through the hole in the tray and disconnect the electrical connector. Install the wave washer before putting in the sensor when reinstalling.

Genuine Chrysler Town & Country Battery Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Battery Sensor found

View related parts
Chrysler Town & Country Sensor-Battery Temperature
Part Number: 56041053
$59.90 MSRP: $87.95
You Save: $28.05 (32%)
ADD TO CART
Product Specifications
- Other Name: Sensor Battery Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chrysler Town & Country | Base, EL, EX, Limited AWD, Limited FWD, LX FWD, LXi FWD, Touring AWD, Touring FWD | 6 Cyl 3.3L, 6 Cyl 3.8L

Chrysler Town & Country Battery Sensor

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Town & Country Battery Sensor at great affordable prices. Moreover, all genuine Chrysler Town & Country Battery Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Town & Country Battery Sensor Parts Questions & Experts Answers

Sensor-Battery Temperature
56041053
Q: Where is the Battery Temperature Sensor Located on Chrysler Town & Country?
A: The battery temperature sensor is on the battery tray. To access it, remove the battery and lift up a flap on the floor of the battery tray. It is secured to the tray with a pair of locking tabs. Squeeze the tabs together, lift up the flap, pull the sensor up through the hole in the tray and disconnect the electrical connector. Install the wave washer before putting in the sensor when reinstalling.