How to Replace the Blower Motor Resistor or Power Module and Blower Motor Assembly on Chrysler Town & Country?

Disconnect the cable from the negative battery terminal. Remove the glove box. Disconnect the electrical connectors for the blower motor resistor or power module. Remove the mounting fasteners and withdraw the unit from the heater/air conditioning housing. Installation is the reverse of removal. Disconnect the electrical connector for the blower motor from the resistor or power module. Disconnect the recirculation door actuator electrical connector, remove the mounting fasteners and then remove the actuator. Remove the air intake housing cover mounting fasteners. Push the blower motor wiring rubber grommet through the hole in the air intake housing cover. Continue to feed the wires into the hole along with the electrical connector. Carefully remove the air intake housing cover. Carefully move the recirculation air door, as necessary, to remove the three screws securing the blower motor assembly to the housing. Gently flex the recirculation air door far enough to remove the blower motor assembly from the lower half of the housing and then remove the assembly. Installation is the reverse of removal. Remove the right rear trim panel. Disconnect the electrical connector for the blower motor resistor or power module. Remove the mounting fasteners and withdraw the unit from the heater/air conditioning housing. Installation is the reverse of removal. Removal of the rear heater/air conditioning housing is necessary to replace the blower motor assembly. The blower motor and blower wheel are balanced to each other at the factory and replaced as an assembly only. Remove the rear heater/air conditioning housing. Remove the three blower motor mounting screws on the rear of the housing. Remove the blower motor from the housing. Installation is the reverse of removal.

Genuine Chrysler Town & Country Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Blower Motors found

View related parts
Chrysler Town & Country Motor-Blower With Wheel
Part Number: 68029719AB
$204.99 MSRP: $308.00
You Save: $103.01 (34%)
ADD TO CART
Product Specifications
- Other Name: Motor Blower with Wheel; Blower Motor
- Replaces: 68029719AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2016 Chrysler Town & Country | Gold, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Touring-L | 6 Cyl 3.3L, 6 Cyl 3.6L, 6 Cyl 3.8L, 6 Cyl 4.0L
View related parts
Chrysler Town & Country Blower With Wheel
Part Number: 68029719AA
$203.13 MSRP: $308.00
You Save: $104.87 (35%)
ADD TO CART
Product Specifications
- Other Name: Motor Blower with Wheel
- Replaced by: 68029719AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chrysler Town & Country | Limited, LX, Touring | 6 Cyl 3.3L, 6 Cyl 3.8L, 6 Cyl 4.0L
View related parts
Chrysler Town & Country Motor-Blower With Wheel
Part Number: 4885475AC
$134.31 MSRP: $204.00
You Save: $69.69 (35%)
ADD TO CART
Product Specifications
- Other Name: Motor Blower with Wheel; Blower Motor
- Replaces: 4885475AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Chrysler Town & Country | Base, EL, EX, LX AWD, LX FWD, LXi AWD, LXi FWD, Limited AWD, Limited FWD, Touring AWD, Touring FWD | 6 Cyl 3.3L, 6 Cyl 3.5L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Motor-Blower W/WHEEL
Part Number: 4885475AB
$134.31 MSRP: $204.00
You Save: $69.69 (35%)
ADD TO CART
Product Specifications
- Other Name: Motor Blower with Wheel
- Replaced by: 4885475AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Town & Country | Limited AWD, Limited FWD, LX AWD, LX FWD, LXi AWD, LXi FWD | 6 Cyl 3.3L, 6 Cyl 3.5L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Motor-Blower With Wheel
Part Number: 5183147AA
$238.70 MSRP: $363.00
You Save: $124.30 (35%)
ADD TO CART
Product Specifications
- Other Name: Motor Blower with Wheel
- Replaced by: 5183147AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2016 Chrysler Town & Country | Base, Gold, Limited, Limited FWD, Limited Platinum, LX, LX FWD, S, Touring, Touring FWD, Touring L, Touring Plus, Touring-L | 6 Cyl 3.3L, 6 Cyl 3.6L, 6 Cyl 3.8L, 6 Cyl 4.0L
View related parts
Chrysler Town & Country Motor
Part Number: 4798680
$296.95 MSRP: $377.88
You Save: $80.93 (22%)
ADD TO CART
Product Specifications
- Other Name: Motor Blower with Wheel; Blower Assembly, Blower Motor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Town & Country | Limited AWD, Limited FWD, LX AWD, LX FWD, LX Long Wheelbase AWD, LX Long Wheelbase FWD, LX Short Wheelbase FWD, LXi AWD, LXi FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Motor-Blower With Wheel
Part Number: 5019185AA
Product Specifications
- Other Name: Motor Blower with Wheel; Blower Motor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Town & Country | Base, EL, EX, Limited AWD, Limited FWD, LX AWD, LX FWD, LXi AWD, LXi FWD, Touring AWD, Touring FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country A/C Blower
Part Number: 4494309
Product Specifications
- Other Name: Blower Motor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990 Chrysler Town & Country | 6 Cyl 3.0L, 6 Cyl 3.3L
View related parts
Chrysler Town & Country Motor, Heater Blower
Part Number: R4494309
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990 Chrysler Town & Country | 6 Cyl 3.0L, 6 Cyl 3.3L
View related parts
Chrysler Town & Country Motor-Blower With Wheel
Part Number: 4882397AB
Product Specifications
- Other Name: Motor Blower with Wheel
- Replaced by: 4874204AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chrysler Town & Country | Limited AWD, Limited FWD, LX AWD, LX FWD, LXi AWD, LXi FWD, SX | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Motor-A/C Blower (Pm) Zero Defect
Part Number: 5264400
Product Specifications
- Other Name: Motor, Heater Blower
- Replaced by: R5264400
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Chrysler Town & Country | Base AWD, Base FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Motor-Heater Blower
Part Number: R5264400
Product Specifications
- Other Name: Motor, Heater Blower; Blower Motor
- Replaces: 5264400
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Chrysler Town & Country | Base AWD, Base FWD | 6 Cyl 3.3L, 6 Cyl 3.8L

Chrysler Town & Country Blower Motor

The Blower Motor is used in Chrysler Town & Country vehicles to blow hot or cool air from the vehicles' AC system to the cabin of the car. It works by driving a fan that blows air in order to warm the car's interior and allow the drivers regulate the temperature depending on morning fog or the hot interior of the car after being left under the sun. Blower motors in Chrysler Town & Country models may be of single or two units depending on whether the models come with advanced climate control units or not, one blower motor is installed in the heater box whereas another in the rear end area. It has a Blower Motor whose functionality is controlled through a module connected through wiring and if it fails it can cause a noticeable problem in temperature control. It is very important to have Chrylser Town & Country Blower Motor and its controls well maintained to ensure it performs at its premier.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Town & Country Blower Motor at great affordable prices. Moreover, all genuine Chrysler Town & Country Blower Motor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Town & Country Blower Motor Parts Questions & Experts Answers

Motor-Blower With Wheel
4885475AC
Q: How to Replace the Blower Motor Resistor or Power Module and Blower Motor Assembly on Chrysler Town & Country?
A: Disconnect the cable from the negative battery terminal. Remove the glove box. Disconnect the electrical connectors for the blower motor resistor or power module. Remove the mounting fasteners and withdraw the unit from the heater/air conditioning housing. Installation is the reverse of removal. Disconnect the electrical connector for the blower motor from the resistor or power module. Disconnect the recirculation door actuator electrical connector, remove the mounting fasteners and then remove the actuator. Remove the air intake housing cover mounting fasteners. Push the blower motor wiring rubber grommet through the hole in the air intake housing cover. Continue to feed the wires into the hole along with the electrical connector. Carefully remove the air intake housing cover. Carefully move the recirculation air door, as necessary, to remove the three screws securing the blower motor assembly to the housing. Gently flex the recirculation air door far enough to remove the blower motor assembly from the lower half of the housing and then remove the assembly. Installation is the reverse of removal. Remove the right rear trim panel. Disconnect the electrical connector for the blower motor resistor or power module. Remove the mounting fasteners and withdraw the unit from the heater/air conditioning housing. Installation is the reverse of removal. Removal of the rear heater/air conditioning housing is necessary to replace the blower motor assembly. The blower motor and blower wheel are balanced to each other at the factory and replaced as an assembly only. Remove the rear heater/air conditioning housing. Remove the three blower motor mounting screws on the rear of the housing. Remove the blower motor from the housing. Installation is the reverse of removal.