×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Avenger Radiator
Cooling Radiator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Radiators found
Dodge Avenger Engine Cooling Radiator
Part Number: 68004049AB$253.75 MSRP: $340.00You Save: $86.25 (26%)
Dodge Avenger Engine Cooling Radiator
Part Number: 68004049AA$223.30 MSRP: $340.00You Save: $116.70 (35%)
Dodge Avenger Engine Cooling Radiator
Part Number: 5191286AB$244.20 MSRP: $371.00You Save: $126.80 (35%)
Dodge Avenger Engine Cooling Radiator
Part Number: 68033819AA$244.20 MSRP: $371.00You Save: $126.80 (35%)
Dodge Avenger Engine Cooling Radiator
Part Number: 2AMR1892AA$114.68 MSRP: $145.93You Save: $31.25 (22%)Dodge Avenger Engine Cooling Radiator
Part Number: MR127912$247.83 MSRP: $315.36You Save: $67.53 (22%)
Dodge Avenger Radiator
Dodge Avenger automobiles have a radiator that is part of the cooling system that helps to remove heat from the engine coolant. It stands as a heat exchanger since it comes with passages that allow the flow of coolant while the fins offer passage to air, the two allowing the process of heat transfer. Aluminum is generally used for the Avenger's radiator cores, while plastic or aluminum tanks are common, but copper/brass Dodges are also out there. Years later, there are performance radiators, they are better build: tanks are made of lightweight aluminum and welded, thus increasing their durability and effectiveness due to a better ratio of metal to transfer heat. These performance radiators are mostly characterized by higher tube diameters as well as fin density than ordinary models that would enhance the flow of the coolant besides improving the cooling of the engine. Dodge Avenger radiators come standard and universal so they can be used for custom and racing types.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger Radiator at great affordable prices. Moreover, all genuine Dodge Avenger Radiator come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Avenger Radiator Parts Questions & Experts Answers
- Q: How Do You Remove and Install a Radiator on Dodge Avenger?A: To remove the radiator, start by having an air conditioning technician discharge the system and recover the refrigerant. Then, disconnect the negative battery cable and raise the front of the vehicle on jackstands. Remove the engine cover, air filter and intake hose assembly, and drain the cooling system. Take off the front bumper cover and disconnect the electrical horn connectors. On newer models, remove the under-vehicle splash shield. For 2015 and later models, remove the large multi-purpose bracket to the front of the radiator/condenser by following a series of steps. Disconnect the upper and lower radiator hoses and the electrical connectors for the radiator fan. Remove the Engine Cooling Fan assembly if necessary. Disconnect the A/C lines attached to the condenser and remove the transmission cooler bracket. On older models, compress the plastic tabs on top of the radiator to release it from the support frame. On newer models, remove the Torx screws and tilt the radiator rearward to release it. Lift the radiator and air conditioning condenser assembly from the vehicle and separate the condenser from the radiator. Check the radiator for leaks and damage, and have it repaired if necessary. Clean the radiator with a garden hose before reinstalling it. Check the rubber mounts and replace them if needed. To install the radiator, make sure the A/C condenser is properly attached and seat the radiator into the lower rubber mounts. Fill the cooling system with the proper mixture of antifreeze and water, start the engine to check for leaks, and have the air conditioning system recharged.
