How to remove the A/C Condenser on Dodge Challenger?

The receiver-drier should be replaced whenever the condenser is replaced. Have the air conditioning system discharged by an automotive air conditioning technician. Disconnect the cable from the negative battery terminal. Remove the front bumper cover. Remove the plastic air deflectors on each side of the condenser. Disconnect the transmission oil cooler lines from the condenser. Remove the mounting fasteners for the power steering oil cooler and move the cooler aside. Disconnect the refrigerant lines from the condenser. Plug the lines and fittings to prevent the entry of moisture and contaminants. Discard the O-ring seals. Remove the fasteners that mount the condenser to the radiator and lower the condenser from the vehicle. If the original condenser will be reinstalled, store it with the line fittings on top to prevent oil from draining out. If a new condenser is being installed, pour 1 oz (30 ml) of the appropriate refrigerant oil into it prior to installation. Install new O-ring seals onto the refrigerant line fittings. Reinstall the components in the reverse order of removal. Have the system evacuated, recharged and leak-tested by the shop that discharged it.

Genuine Dodge Challenger A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 A/C Condensers found

View related parts
Dodge Challenger Cooler-CONDENSER And Trans Cooler
Part Number: 68085784AA
$469.22 MSRP: $717.00
You Save: $247.78 (35%)
ADD TO CART
Product Specifications
- Other Name: Cooler Condenser and Trans Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SE, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger CONDENSER-Air Conditioning
Part Number: 68272794AA
$300.30 MSRP: $456.00
You Save: $155.70 (35%)
ADD TO CART
Product Specifications
- Other Name: CONDENSER Air Conditioning; Condenser, Condenser Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SXT, SXT Plus | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Cooler-CONDENSER And Trans Cooler
Part Number: 5137693AD
$348.70 MSRP: $529.00
You Save: $180.30 (35%)
ADD TO CART
Product Specifications
- Other Name: Cooler Condenser and Trans Cooler; Condenser, Condenser Assembly
- Replaced by: 5137693AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2020 Dodge Challenger | R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT Plus | 8 Cyl 6.4L
View related parts
Dodge Challenger Cooler-CONDENSER And Trans Cooler
Part Number: 5170743AA
$348.70 MSRP: $529.00
You Save: $180.30 (35%)
ADD TO CART
Product Specifications
- Other Name: Cooler Condenser and Trans Cooler
- Replaced by: 5137693AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2012 Dodge Challenger | R/T, SRT8 | 8 Cyl 6.1L, 8 Cyl 6.4L
- 2008 Dodge Challenger | SRT8 | 8 Cyl 6.1L
View related parts
Dodge Challenger Condenser And Transmission Cooler
Part Number: 68318330AA
$277.20 MSRP: $421.00
You Save: $143.80 (35%)
ADD TO CART
Product Specifications
- Other Name: Cooler-CONDENSER And Trans Cooler; Condenser
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2020 Dodge Challenger | R/T 392 RWD, R/T RWD, R/T Scat Pack RWD, SRT 392 RWD, SRT Demon RWD, SRT Hellcat RWD | 8 Cyl 6.2L
View related parts
Dodge Challenger Cooler-CONDENSER And Trans Cooler
Part Number: 68050127AB
$646.80 MSRP: $980.00
You Save: $333.20 (34%)
ADD TO CART
Product Specifications
- Other Name: Cooler Condenser and Trans Cooler
- Replaces: 68050127AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Dodge Challenger Cooler-CONDENSER And Trans Cooler
Part Number: 68050127AA
$646.80 MSRP: $980.00
You Save: $333.20 (34%)
ADD TO CART
Product Specifications
- Other Name: Cooler Condenser and Trans Cooler
- Replaced by: 68050127AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Dodge Challenger Cooler-CONDENSER And Trans Cooler
Part Number: 2AMC3237AA
Product Specifications
- Other Name: Cooler Condenser and Trans Cooler With Drier - Note:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2013 Dodge Challenger | R/T, SE, SRT8, SRT8 Core | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Challenger Cooler-CONDENSER And Trans Cooler
Part Number: 68050132AA
Product Specifications
- Other Name: Cooler Condenser and Trans Cooler With Drier; Condenser, Condenser Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L

Dodge Challenger A/C Condenser

In the Dodge Challenger A/C Condenser operates as an efficient heat exchanger designed to cool the gaseous refrigerant and change it to liquid before the cars' system shifts it to the accumulator. Located usually in front of the radiator, it includes a system of tubes through which the cooling process takes place. The overview does not make a distinction as to the variation in types or style of the A/C Condensers depending on the model of the Challenger but the basics of the design and functionality are standard. The fundamental means of heat exchange is a major aspect of the A/C Condenser in regulating cabin temperatures so as to provide comfort to the occupants of the vehicle when in operation.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Challenger A/C Condenser at great affordable prices. Moreover, all genuine Dodge Challenger A/C Condenser come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Challenger A/C Condenser Parts Questions & Experts Answers

Cooler-CONDENSER And Trans Cooler
5137693AD
Q: How to remove the A/C Condenser on Dodge Challenger?
A: The receiver-drier should be replaced whenever the condenser is replaced. Have the air conditioning system discharged by an automotive air conditioning technician. Disconnect the cable from the negative battery terminal. Remove the front bumper cover. Remove the plastic air deflectors on each side of the condenser. Disconnect the transmission oil cooler lines from the condenser. Remove the mounting fasteners for the power steering oil cooler and move the cooler aside. Disconnect the refrigerant lines from the condenser. Plug the lines and fittings to prevent the entry of moisture and contaminants. Discard the O-ring seals. Remove the fasteners that mount the condenser to the Radiator and lower the condenser from the vehicle. If the original condenser will be reinstalled, store it with the line fittings on top to prevent oil from draining out. If a new condenser is being installed, pour 1 oz (30 ml) of the appropriate refrigerant oil into it prior to installation. Install new O-ring seals onto the refrigerant line fittings. Reinstall the components in the reverse order of removal. Have the system evacuated, recharged and leak-tested by the shop that discharged it.