How to remove and install Drive Shaft on Dodge Challenger?

Replacing a driveshaft center bearing is best done with a hydraulic press since the driveshaft must be removed to accomplish the center bearing removal job. Start by lifting the car and placing it on jackstands with the selector lever positioned to Neutral. Next strip off the crossmember brace and the rear part of the exhaust pipe together with the heat shield over the exhaust. In order to align the driveshaft correctly during the reassembly, it is recommend to use chalk or scribe the position of the driveshaft to the flange of the transmission. Depower the fasteners that hold the driveshaft to the transmission flange and mark the position of the driveshaft to the differential pinion flange then the fasteners that holds them together are also removed. Subsequently, you need to unbolt the center support bearing and bring out the driveshaft out of the accommodating slot. When installing the driveshaft, it is advisable to use new bolts; if old bolts are used, then, the threads should be escapement with the use of thread locker. The installation process is the direct opposite of the removal by aligning the marks which will have been made prior before the removal and tightening of the fasteners to the recommended torque.

Genuine Dodge Challenger Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

46 Drive Shafts found

View related parts
Dodge Challenger Drive Shaft
Part Number: 68272626AD
$740.89 MSRP: $1150.00
You Save: $409.11 (36%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Replaces: 52123980AC, 52123980AF, 52123980AG, 68272626AC, 52123980AE, 52123980AD, 68272626AB, 68272626AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SRT Hellcat RWD, SXT, SXT Plus | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Drive Shaft
Part Number: 52123974AJ
$935.72 MSRP: $1460.00
You Save: $524.28 (36%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Replaces: 52123974AC, 52123974AE, 52123974AF, 52123974AH, 52123974AD, 52123974AI, 52123974AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SRT Hellcat RWD, SXT, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Drive Shaft
Part Number: 68200149AD
$365.83 MSRP: $824.00
You Save: $458.17 (56%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Replaced by: 68200149AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2020 Dodge Challenger | GT AWD, SXT AWD | 6 Cyl 3.6L
View related parts
Dodge Challenger Drive Shaft
Part Number: 52123975AG
$1006.07 MSRP: $1570.00
You Save: $563.93 (36%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Replaces: 52123975AC, 52123975AB, 52123975AD, 52123975AE, 52123975AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SRT Hellcat RWD, SXT, SXT Plus | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Rear Drive Shaft
Part Number: 5038545AA
$1421.17 MSRP: $2200.00
You Save: $778.83 (36%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive; Drive Shaft
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Challenger | R/T, SRT, SRT Core, SRT8, SRT8 Core | 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Challenger Rear Drive Shaft
Part Number: 68272626AA
$752.93 MSRP: $1150.00
You Save: $397.07 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Replaced by: 68272626AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Dodge Challenger | R/T Scat Pack, SRT 392, SXT, SXT Plus | 8 Cyl 5.7L
View related parts
Dodge Challenger Rear Drive Shaft
Part Number: 52123980AF
$752.93 MSRP: $1150.00
You Save: $397.07 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Replaced by: 68272626AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Dodge Challenger | R/T Scat Pack, SRT 392, SXT, SXT Plus | 8 Cyl 6.4L
View related parts
Dodge Challenger Drive Shaft
Part Number: 68312786AC
$454.46 MSRP: $694.00
You Save: $239.54 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Replaces: 68312786AB, 68312786AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2023 Dodge Challenger | GT AWD, SXT AWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Drive Shaft Rear
Part Number: 53010846AB
$788.88 MSRP: $1170.00
You Save: $381.12 (33%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive; Drive Shaft
- Position: Rear
- Replaces: 53010846AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Dodge Challenger | R/T 392 RWD, R/T RWD, R/T Scat Pack RWD, SRT 392 RWD, SRT Demon RWD, SRT Hellcat RWD | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger DRIVE
Part Number: 68200149AE
$536.30 MSRP: $824.00
You Save: $287.70 (35%)
ADD TO CART
Product Specifications
- Other Name: Drive Shaft, Drive Shaft Assembly
- Replaces: 68200149AC, 68200149AB, 68200149AD, 68200149AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2023 Dodge Challenger | GT AWD, SXT AWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Front Drive Shaft Assembly
Part Number: 68200149AC
$365.83 MSRP: $824.00
You Save: $458.17 (56%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Position: Front
- Replaced by: 68200149AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2018 Dodge Challenger | GT AWD | 6 Cyl 3.6L
View related parts
Dodge Challenger Rear Drive Shaft
Part Number: 68272626AC
$752.93 MSRP: $1150.00
You Save: $397.07 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Replaced by: 68272626AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2018 Dodge Challenger | R/T 392 RWD, R/T RWD, SRT 392 RWD | 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Challenger Rear Drive Shaft
Part Number: 53010678AG
$935.53 MSRP: $1425.00
You Save: $489.47 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Position: Rear
- Replaced by: 53010678AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016 Dodge Challenger | R/T, R/T Scat Pack, SRT 392, SRT Hellcat | 8 Cyl 6.2L
View related parts
Dodge Challenger Rear Drive Shaft
Part Number: 68272626AB
$752.93 MSRP: $1150.00
You Save: $397.07 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Replaced by: 68272626AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016 Dodge Challenger | R/T, R/T Scat Pack, SRT 392 | 8 Cyl 5.7L
View related parts
Dodge Challenger Rear Drive Shaft
Part Number: 52123980AG
$752.93 MSRP: $1150.00
You Save: $397.07 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Position: Rear
- Replaced by: 68272626AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016 Dodge Challenger | R/T, R/T Scat Pack, SRT 392 | 8 Cyl 6.4L
View related parts
Dodge Challenger Rear Drive Shaft
Part Number: 52123975AE
$1022.43 MSRP: $1570.00
You Save: $547.57 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Replaced by: 52123975AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016 Dodge Challenger | R/T, R/T Scat Pack, SRT 392 | 8 Cyl 5.7L
View related parts
Dodge Challenger Rear Drive Shaft
Part Number: 53010678AI
$935.53 MSRP: $1425.00
You Save: $489.47 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Position: Rear
- Replaced by: 53010678AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2018 Dodge Challenger | R/T 392 RWD, R/T RWD, SRT 392 RWD, SRT Demon RWD, SRT Hellcat RWD | 8 Cyl 6.2L
View related parts
Dodge Challenger Rear Drive Shaft
Part Number: 53010678AD
$935.53 MSRP: $1425.00
You Save: $489.47 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Position: Rear
- Replaced by: 53010678AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Dodge Challenger | R/T Scat Pack, SRT 392, SRT Hellcat, SXT, SXT Plus | 8 Cyl 6.2L
View related parts
Dodge Challenger Drive Shaft
Part Number: 53010678AJ
$969.53 MSRP: $1425.00
You Save: $455.47 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Replaced by: 53010678AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2020 Dodge Challenger | R/T RWD, R/T Scat Pack RWD, SRT Hellcat RWD | 8 Cyl 6.2L
View related parts
Dodge Challenger Drive Shaft
Part Number: 52123975AF
$1022.43 MSRP: $1570.00
You Save: $547.57 (35%)
ADD TO CART
Product Specifications
- Other Name: Shaft-Drive
- Replaced by: 52123975AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2018 Dodge Challenger | R/T 392 RWD, R/T RWD, SRT 392 RWD | 8 Cyl 5.7L

| Page 1 of 3 |Next >

1-20 of 46 Results

Dodge Challenger Drive Shaft

Drive Shaft of Dodge Challenger cars is a drive train component that convey mechanical power and torque from the engine or transmission to the rear axle, which is very important for the car to run. It is intended to sustainhigh torsional loads while at the same time having low inertia because of its light weight. The Dodge Challenger Incorporates the usage of a one-piece or two-piece Drive Shaft for efficient power transmission to the drive wheels in the vehicle depending on the model's form. In rear-wheel drive systems, the Drive Shaft is an extension from the solid part of the engine to the rear axle shaft In all-wheel-drive cars' configurations, further techniques may come in handy in the Drive Shaft for relay power. Flexibility in the alignment and distance is made possible by the use of universal joints or splined joints especially for the special design of the Dodge Challenger. Al in all, the Drive Shaft is important parts of the Dodge Challenger, as pertains to the functionality and performance of the car's drive train.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Challenger Drive Shaft at great affordable prices. Moreover, all genuine Dodge Challenger Drive Shaft come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Challenger Drive Shaft Parts Questions & Experts Answers

Rear Drive Shaft
5038277AE
Q: How to remove and install Drive Shaft on Dodge Challenger?
A: Replacing a driveshaft center bearing is best done with a hydraulic press since the driveshaft must be removed to accomplish the center bearing removal job. Start by lifting the car and placing it on jackstands with the selector lever positioned to Neutral. Next strip off the crossmember brace and the rear part of the exhaust pipe together with the heat shield over the exhaust. In order to align the driveshaft correctly during the reassembly, it is recommend to use chalk or scribe the position of the driveshaft to the flange of the transmission. Depower the fasteners that hold the driveshaft to the transmission flange and mark the position of the driveshaft to the differential pinion flange then the fasteners that holds them together are also removed. Subsequently, you need to unbolt the center support bearing and bring out the driveshaft out of the accommodating slot. When installing the driveshaft, it is advisable to use new bolts; if old bolts are used, then, the threads should be escapement with the use of thread locker. The installation process is the direct opposite of the removal by aligning the marks which will have been made prior before the removal and tightening of the fasteners to the recommended torque.