How do you remove the rear ignition coil on Dodge Challenger?

First of all, to remove ignition coils on 2.7L, 3.5L, or 3.6L models, remove the air intake duct or upper intake manifold as needed. Disconnect the coil's electrical connector and remove the mounting bolt. For 2005 and earlier V8 models, disconnect the spark plug wire boot and remove the coil. For 2006 and later models, remove the engine cover(s), and air cleaner housing, and detach the coolant reservoir before removing the coil. Inspect the rubber spark plug boot and wire condition. Use a DVOM to test the coil's resistance and replace it if necessary.

Genuine Dodge Challenger Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Ignition Coils found

View related parts
Dodge Challenger Coil-Ignition
Part Number: 5149168AJ
$40.96 MSRP: $60.20
You Save: $19.24 (32%)
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition Coil
- Replaces: 5149168AI, 5149168AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SE, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Electrical Ignition Coil
Part Number: 5149168AI
$40.32 MSRP: $60.20
You Save: $19.88 (34%)
ADD TO CART
Product Specifications
- Other Name: Coil-Ignition
- Replaced by: 5149168AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2019 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SE, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6L
View related parts
Dodge Challenger Ignition Coil
Part Number: 68238603AA
$80.24 MSRP: $122.00
You Save: $41.76 (35%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ign-Ignition
- Replaces: 56029129AA, 56029129AF, 56029129AB, 68060346AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2023 Dodge Challenger | R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT Plus | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.1L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Ignition Coil
Part Number: 56029129AF
$80.14 MSRP: $122.00
You Save: $41.86 (35%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ign-Ignition
- Replaced by: 68238603AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2016 Dodge Challenger | R/T, R/T Scat Pack, SRT, SRT 392, SRT Core, SRT Hellcat, SRT8, SRT8 Core, SXT, SXT Plus | 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Challenger Ignition Coil
Part Number: 4606869AB
$62.55 MSRP: $94.20
You Save: $31.65 (34%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ign-Ignition
- Replaced by: 4606869AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T, SE | 6 Cyl 3.5L
View related parts
Dodge Challenger Ignition Coil
Part Number: 5149168AH
$40.32 MSRP: $60.20
You Save: $19.88 (34%)
ADD TO CART
Product Specifications
- Other Name: Coil-Ignition
- Replaced by: 5149168AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.6L
View related parts
Dodge Challenger Ignition Coil
Part Number: 56029129AB
$48.33 MSRP: $122.00
You Save: $73.67 (61%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ign-Ignition
- Replaced by: 68238603AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Dodge Challenger | R/T, SRT8 | 8 Cyl 5.7L, 8 Cyl 6.1L, 8 Cyl 6.4L
View related parts
Dodge Challenger Ignition Coil
Part Number: 68060346AA
$80.14 MSRP: $122.00
You Save: $41.86 (35%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ign-Ignition
- Replaced by: 68238603AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Challenger | R/T | 8 Cyl 5.7L

Dodge Challenger Ignition Coil

In Dodge Challenger automobiles the Ignition Coil plays a pivotal role of converting low voltage from the battery into high voltage required to burn fuel in the combustors. This change is critical when it comes to igniting the spark plugs to properly run the engine on the car. Old models of Dodge Challenger cars used conventional systems of sparking with mechanical contact breakers while new models have more modern systems which have one ignition coil per cylinder or per each pair of cylinders as this eliminates the use of ignition cables and distributors. Some of the ignition coils that may apply to Dodge Challenger automobiles might be Coil on plug and wasted spark. Wasted spark system employs one coil for two cylinders, and the sparks are fired simultaneously with one of the sparks considered a wastes, in modern ignition coils we have laminated iron cores and copper wire coils where energy is stored in magnetic fields for sparking purpose. Potential problems that arise from a faulty Ignition Coil include, high fuel consumption or poorly performing engine and this explains its importance in the performance of Dodge Challenger.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Challenger Ignition Coil at great affordable prices. Moreover, all genuine Dodge Challenger Ignition Coil come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Challenger Ignition Coil Parts Questions & Experts Answers

Ignition Coil
56029129AF
Q: How do you remove the rear ignition coil on Dodge Challenger?
A: First of all, to remove ignition coils on 2.7L, 3.5L, or 3.6L models, remove the air intake duct or upper intake manifold as needed. Disconnect the coil's electrical connector and remove the mounting bolt. For 2005 and earlier V8 models, disconnect the spark plug wire boot and remove the coil. For 2006 and later models, remove the engine cover(s), and air cleaner housing, and detach the coolant reservoir before removing the coil. Inspect the rubber spark plug boot and wire condition. Use a DVOM to test the coil's resistance and replace it if necessary.

Related Dodge Challenger Parts

Browse by Year

2023 Ignition Coil 2022 Ignition Coil 2021 Ignition Coil 2020 Ignition Coil 2019 Ignition Coil 2018 Ignition Coil 2017 Ignition Coil 2016 Ignition Coil 2015 Ignition Coil 2014 Ignition Coil 2013 Ignition Coil 2012 Ignition Coil 2011 Ignition Coil 2010 Ignition Coil 2009 Ignition Coil 2008 Ignition Coil