How to Replace an Automotive Air Conditioning Condenser for the Dodge Magnum?

The receiver-drier should be replaced whenever the condenser is replaced. Have the air conditioning system discharged by an automotive air conditioning technician. Disconnect the cable from the negative battery terminal. Remove the front bumper cover. Remove the plastic air deflectors on each side of the condenser. Disconnect the transmission oil cooler lines from the condenser. Remove the mounting fasteners for the power steering oil cooler and move the cooler aside. Disconnect the refrigerant lines from the condenser. Plug the lines and fittings to prevent the entry of moisture and contaminants. Discard the 0-ring seals. Remove the fasteners that mount the condenser to the radiator and lower the condenser from the vehicle. If the original condenser will be reinstalled, store it with the line fittings on top to prevent oil from draining out. If a new condenser is being installed, pour 1 oz (30 ml) of the appropriate refrigerant oil into it prior to installation. Install new R-134a compatible 0-ring seals onto the refrigerant line fittings. Reinstall the components in the reverse order of removal. Have the system evacuated, recharged and leak-tested by the shop that discharged it.

Genuine Dodge Magnum A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 A/C Condensers found

View related parts
Dodge Magnum Cooler-CONDENSER And Trans Cooler
Part Number: 5137693AA
$393.08 MSRP: $529.00
You Save: $135.92 (26%)
ADD TO CART
Product Specifications
- Other Name: Cooler Condenser and Trans Cooler With Drier
- Replaced by: 5137693AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Magnum | R/T AWD, R/T RWD, SE RWD, SRT8 RWD, SXT AWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Dodge Magnum Cooler-CONDENSER And Trans Cooler
Part Number: 5170743AA
$348.70 MSRP: $529.00
You Save: $180.30 (35%)
ADD TO CART
Product Specifications
- Other Name: Cooler Condenser and Trans Cooler
- Replaced by: 5137693AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T AWD, R/T RWD, SE RWD, SRT8 RWD, SXT AWD, SXT RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Dodge Magnum Cooler-CONDENSER And Trans Cooler
Part Number: 5137693AB
$348.70 MSRP: $529.00
You Save: $180.30 (35%)
ADD TO CART
Product Specifications
- Other Name: Cooler Condenser and Trans Cooler With Drier - Note:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab
- Replaced by: 5137693AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Magnum | R/T AWD, R/T RWD, SE RWD, SRT8 RWD, SXT AWD, SXT RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Dodge Magnum Cooler-CONDENSER And Trans Cooler
Part Number: 2AMC3237AA
Product Specifications
- Other Name: Cooler Condenser and Trans Cooler With Drier - Note:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | R/T AWD, R/T RWD, SE RWD, SRT8 RWD, SXT AWD, SXT RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Dodge Magnum Cooler-CONDENSER And Trans Cooler
Part Number: 5175368AA
Product Specifications
- Other Name: Cooler Condenser and Trans Cooler With Drier - Note:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab; Condenser Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Magnum | R/T AWD, R/T RWD, SE RWD, SRT8 RWD, SXT AWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L

Dodge Magnum A/C Condenser

The a/c condenser in Dodge Magnum motor vehicles is a heat exchanger that takes the gaseous refrigerant, cools it and evaporates it to form a liquid form and it is then taken to the accumulator. Sometimes located in front of the radiator but more commonly located at the front of the car, the A/C Condenser is made up a set of tubes which are used in this cooling process. The former does not include any information about various types or kinds of A/C Condenser used in a number of Dodge Magnum versions However, the basic structure is the same for all vehicles. The main function of the A/C Condenser in Dodge Magnum vehicles focuses on proper management of refrigerant, which is very useful in maintaining the optimal performance of the car's air conditioning system.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Magnum A/C Condenser at great affordable prices. Moreover, all genuine Dodge Magnum A/C Condenser come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Magnum A/C Condenser Parts Questions & Experts Answers

Cooler-CONDENSER And Trans Cooler
5170743AA
Q: How to Replace an Automotive Air Conditioning Condenser for the Dodge Magnum?
A: The receiver-drier should be replaced whenever the condenser is replaced. Have the air conditioning system discharged by an automotive air conditioning technician. Disconnect the cable from the negative battery terminal. Remove the front bumper cover. Remove the plastic air deflectors on each side of the condenser. Disconnect the transmission oil cooler lines from the condenser. Remove the mounting fasteners for the power steering oil cooler and move the cooler aside. Disconnect the refrigerant lines from the condenser. Plug the lines and fittings to prevent the entry of moisture and contaminants. Discard the 0-ring seals. Remove the fasteners that mount the condenser to the Radiator and lower the condenser from the vehicle. If the original condenser will be reinstalled, store it with the line fittings on top to prevent oil from draining out. If a new condenser is being installed, pour 1 oz (30 ml) of the appropriate refrigerant oil into it prior to installation. Install new R-134a compatible 0-ring seals onto the refrigerant line fittings. Reinstall the components in the reverse order of removal. Have the system evacuated, recharged and leak-tested by the shop that discharged it.