How do you replace the back-up light switch on a transaxle on Dodge Neon?

Back-up light switch is located on the top of the transaxle. First of all, unscrew the switch and detach the electrical connector from the switch assembly. Before screwing the new switch into place use Teflon tape or something similar to cover the threads. Then fit in the new switch and make certain about the tightening of the switch. Join again the electrical connector and lastly, perform test run on the back-up lights.

Genuine Dodge Neon Back Up Light Switch

Reverse Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Back Up Light Switches found

View related parts
Dodge Neon Switch-Back Up Lamp
Part Number: 4864775
$47.95 MSRP: $70.65
You Save: $22.70 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch Back Up Lamp; Back-Up Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2004 Dodge Neon | 2 Door Base, 2 Door High Line, 2 Door High Line , 2 Door Sport, 4 Door Base, 4 Door High Line, 4 Door Sport, ACR, Base, ES, R/T, S, SE, SXT | 4 Cyl 1.6L, 4 Cyl 2.0L
View related parts
Dodge Neon Switch-Neutral, Safety, Back Up
Part Number: 3747361
$141.00 MSRP: $211.00
You Save: $70.00 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch, Neutral Starter and Back-Up Light (Use Wrg. Pkg. 4209695)
- Replaced by: 3747361AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001 Dodge Neon | 4 Door High Line | 4 Cyl 2.0L
- 1995-1999 Dodge Neon | 2 Door Base, 2 Door High Line, 2 Door Sport, 4 Door Base, 4 Door High Line, 4 Door Sport | 4 Cyl 2.0L
View related parts
Dodge Neon Switch-Electric Back Light
Part Number: 4671670AB
$36.77 MSRP: $63.35
You Save: $26.58 (42%)
ADD TO CART
Product Specifications
- Other Name: Switch Electric Back Light; Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Neon | 4 Door High Line, ACR, Base, ES, R/T, S, SE, SRT-4, SXT | 4 Cyl 1.6L, 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Dodge Neon Switch-Back Up Lamp
Part Number: 5102868AA
Product Specifications
- Other Name: Switch Back Up Lamp; Back-Up Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Neon | SRT-4 | 4 Cyl 2.4L

Dodge Neon Back Up Light Switch

Back Up Light Switch in Dodge Neon car model as we are going to see in the following lines helps in completing a circuit to give power to the reverse lamp when a car is in the reverse gear. This operations when there is switch on by making electric current to flow from the power source through the back up lights to ensure visibility when reversing. It is therefore important and probable that the Engagement of Back Up Light Switch could differ due to the design of following Dodge Neon and kind of transmission it consists mechanical or hydraulic means for the actuation of Back Up Light Switch. Since theoineequiped with the Back Up Light Switch it is very possible that throughout the years different configurations of the same have been adopted on Dodge Neon due to changes in design or technology. The core objective, though, stays the same for these implementations, to improve safety and visibility during the reverse motion.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Neon Back Up Light Switch at great affordable prices. Moreover, all genuine Dodge Neon Back Up Light Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Neon Back Up Light Switch Parts Questions & Experts Answers

Switch-Back Up Lamp
4864775
Q: How do you replace the back-up light switch on a transaxle on Dodge Neon?
A: Back-up light switch is located on the top of the transaxle. First of all, unscrew the switch and detach the electrical connector from the switch assembly. Before screwing the new switch into place use Teflon tape or something similar to cover the threads. Then fit in the new switch and make certain about the tightening of the switch. Join again the electrical connector and lastly, perform test run on the back-up lights.