How do you replace the Park/Neutral position switch on an automatic transaxle on Dodge Neon?

Raise the front of the vehicle and place it securely on jackstands. The Park/Neutral position switch is located at the front lower left corner of automatic transaxles. Disconnect the electrical connector from the switch and unscrew it, discarding the old O-ring. Install a new O-ring, even if planning to reuse the old switch. Install the switch and tighten it to the specified torque, then plug in the electrical connector. Lower the vehicle and check the automatic transaxle fluid level, adding fluid as necessary.

Genuine Dodge Neon Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Neutral Safety Switches found

View related parts
Dodge Neon Sensor-Transmission Range
Part Number: 4659676AC
$65.24 MSRP: $91.10
You Save: $25.86 (29%)
ADD TO CART
Product Specifications
- Other Name: Sensor Transmission Range
- Replaces: 4659676AB, 4659676
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Neon | 4 Door High Line, Base, ES, SE, SXT | 4 Cyl 1.6L, 4 Cyl 2.0L
View related parts
Dodge Neon Switch-Neutral, Safety, Back Up
Part Number: 3747361
$141.00 MSRP: $211.00
You Save: $70.00 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch, Neutral Starter and Back-Up Light (Use Wrg. Pkg. 4209695)
- Replaced by: 3747361AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001 Dodge Neon | 4 Door High Line | 4 Cyl 2.0L
- 1995-1999 Dodge Neon | 2 Door Base, 2 Door High Line, 2 Door Sport, 4 Door Base, 4 Door High Line, 4 Door Sport | 4 Cyl 2.0L

Dodge Neon Neutral Safety Switch

Neutral Safety Switch is yet another component fitted in Dodge Neon cars with the special purpose of not permitting start of the engine if the engine transmission is not in 'neutral' or 'park' positions. This mechanism helps prevent start up movement of the vehicle thus making it safer for drivers and passengers. It is not clear which specific styles of the Neutral Safety Switch might have been employed in Dodge Neon models through the years but variations are unspecified. The primary purpose remains unchanged across these types and is the same as in traditional HUMS: to safely secure a car during ignition to avoid unintentional movement of the vehicle. The necessity of this component in the functioning of the Dodge Neon's can therefore be seen, and it shows how significant the Neutral Safety Switch is in relation to the entire car.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Neon Neutral Safety Switch at great affordable prices. Moreover, all genuine Dodge Neon Neutral Safety Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Neon Neutral Safety Switch Parts Questions & Experts Answers

Sensor-Transmission Range
4659676AC
Q: How do you replace the Park/Neutral position switch on an automatic transaxle on Dodge Neon?
A: Raise the front of the vehicle and place it securely on jackstands. The Park/Neutral position switch is located at the front lower left corner of automatic transaxles. Disconnect the electrical connector from the switch and unscrew it, discarding the old O-ring. Install a new O-ring, even if planning to reuse the old switch. Install the switch and tighten it to the specified torque, then plug in the electrical connector. Lower the vehicle and check the automatic transaxle fluid level, adding fluid as necessary.