How do you replace the IAT sensor and secure it in the fresh air inlet duct on Dodge Neon?

Disconnect the negative battery cable and the electrical connector from the Intake Manifold Temperature Sensor. Remove the air filter housing cover and the fresh air inlet duct. Using diagonal cutters, cut off the small steel band securing the Intake Manifold Temperature Sensor to the fresh air inlet duct, then pull the Intake Manifold Temperature Sensor straight out of its mounting pipe. Install a new steel band on the pipe for the Intake Manifold Temperature Sensor, place the new Intake Manifold Temperature Sensor in the fresh air inlet duct, and crimp the band with CV joint band crimping pliers or use a conventional hose clamp if those are unavailable, ensuring it is tightened securely. The installation process follows the reverse order of removal.

Genuine Dodge Neon Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Intake Manifold Temperature Sensors found

View related parts
Dodge Neon Sensor-Charge Air Temp
Part Number: 4606487AB
$63.83 MSRP: $96.10
You Save: $32.27 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Charge Air Temp
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Neon | SRT-4 | 4 Cyl 2.4L
View related parts
Dodge Neon Sensor-Air Temperature
Part Number: 5293138AA
$22.43 MSRP: $33.30
You Save: $10.87 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor Air Temperature
- Replaced by: 5149264AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Neon | 4 Door High Line, ACR, Base, ES, R/T, S, SE, SRT-4, SXT | 4 Cyl 1.6L, 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Dodge Neon Sensor-Air Charge Temperature
Part Number: 5269756
$43.56 MSRP: $72.20
You Save: $28.64 (40%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Temp.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996 Dodge Neon | 2 Door Base, 2 Door High Line, 2 Door Sport, 4 Door Base, 4 Door High Line, 4 Door Sport | 4 Cyl 2.0L
View related parts
Dodge Neon Sensor-Combination Temp Unit
Part Number: 4661341
$53.78 MSRP: $68.43
You Save: $14.65 (22%)
ADD TO CART
Product Specifications
- Other Name: Sensor Combination Temp. Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Neon | 2 Door Base, 2 Door High Line, 2 Door High Line , 2 Door Sport, 4 Door Base, 4 Door High Line, 4 Door Sport | 4 Cyl 2.0L
View related parts
Dodge Neon Sensor Air Temperature
Part Number: 33004280
Product Specifications
- Other Name: Temperature (Charge Temp.) 6-8 Cyl.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995 Dodge Neon | 2 Door Base, 2 Door High Line , 2 Door Sport, 4 Door Base, 4 Door High Line, 4 Door Sport | 4 Cyl 2.0L

Dodge Neon Intake Manifold Temperature Sensor

Another important composing of Dodge Neon automobile is Intake Manifold Temperature Sensor that is responsible towards intake temperature of air that streams in order to provide favorable combustion. This information is then forwarded to the PCM which in turn adjust the timing of the fuel injector to provide the proper air/ fuel mixture for different operations. A faulty IAT also known as Intake Manifold Temperature Sensor affects the performance of the car by stalling or mixing the wrong ratio of air and fuel. Presumably, the Intake Manifold Temperature Sensors in Dodge Neon models may change the styles through the years, they may have used Mass Air Flow (MAF) sensors and Variable Air Flow (VAF) sensors. The only difference between these types is in how they work, the method used in their calibration or the way they measure the power output after some modification is done. The Intake Manifold Temperature Sensor plays a very vital role within the functionality and performance of the Dodge Neon.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Neon Intake Manifold Temperature Sensor at great affordable prices. Moreover, all genuine Dodge Neon Intake Manifold Temperature Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Neon Intake Manifold Temperature Sensor Parts Questions & Experts Answers

Sensor-Air Temperature
5293138AA
Q: How do you replace the IAT sensor and secure it in the fresh air inlet duct on Dodge Neon?
A: Disconnect the negative battery cable and the electrical connector from the Intake Manifold Temperature Sensor. Remove the air filter housing cover and the fresh air inlet duct. Using diagonal cutters, cut off the small steel band securing the Intake Manifold Temperature Sensor to the fresh air inlet duct, then pull the Intake Manifold Temperature Sensor straight out of its mounting pipe. Install a new steel band on the pipe for the Intake Manifold Temperature Sensor, place the new Intake Manifold Temperature Sensor in the fresh air inlet duct, and crimp the band with CV joint band crimping pliers or use a conventional hose clamp if those are unavailable, ensuring it is tightened securely. The installation process follows the reverse order of removal.