×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Nitro Fuel Rail
Engine Fuel Rail- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Fuel Rails found
Dodge Nitro Fuel Rail
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Nitro Fuel Rail at great affordable prices. Moreover, all genuine Dodge Nitro Fuel Rail come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Nitro Fuel Rail Parts Questions & Experts Answers
- Q: How to Remove Fuel Injectors and Fuel Rail on Dodge Nitro?A: To remove the fuel injectors, start by relieving the fuel pressure and disconnecting the battery cable. Remove the air intake duct/resonator from the air filter housing and Throttle Body. Use a special tool to remove the fuel line from the fuel rail and label and remove any interfering vacuum hoses or electrical wiring and connectors. On 2.4L four-cylinder engines, drain the coolant, remove the thermostat, injector wiring, PCV valve, and intake manifold bolts. On V6 engines, disconnect electrical connectors from the throttle body, remove ignition coils, and intake manifold (4.0L engines). Clean around the injectors and remove the fuel rail mounting nuts/bolts, then gently rock the fuel rail to remove it along with the injectors as an assembly. On V6 models, do not separate the left and right fuel rails, as both sides are serviced together. Remove the injectors from the fuel rail, discard the O-rings, and replace them with new ones coated in clean engine oil. Clean the injector bores on the intake manifold and insert the injectors into their corresponding bores in the fuel rail. Securely tighten the fuel rail mounting nuts/bolts, connect the fuel line(s), and ensure they are properly seated. Connect the electrical connectors to each injector, following numbered tags if present. Complete the installation process in reverse. After installation, turn the ignition switch to On a few times without starting the engine to build up fuel pressure and check for fuel leaks in the lines, fuel rail, and injectors.
Related Dodge Nitro Parts
Dodge Nitro Fuel Pump
Dodge Nitro Fuel Tank
Dodge Nitro Throttle Body
Dodge Nitro Fuel Filter
Dodge Nitro Gas Cap
Dodge Nitro Fuel Level Sensor
Dodge Nitro Fuel Filler Neck
Dodge Nitro Fuel Pressure Regulator
Dodge Nitro Throttle Body Gasket