How to remove and install a crankshaft pulley and Harmonic Balancer in 3.7L V6 and 4.7L V8 engine on Dodge Ram 3500?

Disconnect the battery cable from its negative terminal. Next, remove the top radiator hose after draining some coolant. Remove the fans and shroud jointly as one unit. Store the fan assembly in an upright position so that you do not ruin the bearing. Take off the drive belt. Use a strap wrench together with a breaker bar to take out crankshaft pulley's center bolt. Using a puller with three hooks, and making sure that they only touch the hub of pulley, pull off the damper from crankshaft. Check if there are any grooves on the surface of pulley's hub and install new one if found necessary. Lubricate pulley's hub using clean engine oil and align key on crankshaft with slot in pulley.Installation tool for vibration damper can be used to push this onto crankshaft.Pull it over by using vibration damper installation tool until it seats correctly.Push it on crankshaft then finish pulling down by using vibration damper installation tool.Finally, tighten the fixing bolts of the damper on the crankshaft to the specified torque.Remaining part of installation is reverse of removal.

Genuine Dodge Ram 3500 Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Crankshaft Pulleys found

View related parts
Dodge Ram 3500 DAMPER-CRANKSHAFT
Part Number: 53022083AA
$366.64 MSRP: $564.00
You Save: $197.36 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Ram 3500 | Quad Chassis CAB 2WD, Quad Chassis CAB 4WD, Regular Chassis CAB 2WD, Regular Chassis CAB 4WD | 8 Cyl 5.7L
View related parts
Dodge Ram 3500 DAMPER-CRANKSHAFT
Part Number: 53021303BA
$179.35 MSRP: $265.00
You Save: $85.65 (33%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 53021303AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Ram 3500 | Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Laramie Regular Cab 2WD, Laramie Regular Cab 4WD, Quad Cab Chassis 2WD, Quad Cab Chassis 4WD, Regular Cab Chassis 2WD, Regular Cab Chassis 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 8 Cyl 5.7L
View related parts
Dodge Ram 3500 DAMPER-CRANKSHAFT
Part Number: 5011800AA
$686.40 MSRP: $1050.00
You Save: $363.60 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2002 Dodge Ram 3500 | Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, Regular Cab Chassis 2WD, Regular Cab Chassis 4WD | 6 Cyl 5.9L Diesel
View related parts
Dodge Ram 3500 Pulley-Crankshaft
Part Number: 5037204AA
$119.63 MSRP: $180.00
You Save: $60.37 (34%)
ADD TO CART
Product Specifications
- Other Name: PULLEY Crankshaft
- Replaced by: 5037204AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Ram 3500 | SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD
View related parts
Dodge Ram 3500 DAMPER-CRANKSHAFT
Part Number: 68005166AA
$894.90 MSRP: $1320.00
You Save: $425.10 (33%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 68143868AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Ram 3500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Mega Cab 2WD, Mega Cab 4WD, Quad Cab Chassis 2WD, Quad Cab Chassis 4WD, Quad Chassis CAB 2WD, Quad Chassis CAB 4WD, Regular Cab Chassis 2WD, Regular Cab Chassis 4WD, Regular Chassis CAB 2WD, Regular Chassis CAB 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 6 Cyl 6.7L Diesel
View related parts
Dodge Ram 3500 DAMPER-CRANKSHAFT
Part Number: 53021303AD
$204.35 MSRP: $265.00
You Save: $60.65 (23%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Vibration Damper
- Replaces: 53021303BA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 3500 | Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Laramie Regular Cab 2WD, Laramie Regular Cab 4WD, Quad Cab Chassis 2WD, Quad Cab Chassis 4WD, Quad Chassis CAB 2WD, Quad Chassis CAB 4WD, Regular Cab Chassis 2WD, Regular Cab Chassis 4WD, Regular Chassis CAB 2WD, Regular Chassis CAB 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 8 Cyl 5.7L
View related parts
Dodge Ram 3500 DAMPER-CRANKSHAFT
Part Number: 5037551AA
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 5037551AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Ram 3500 | SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD
View related parts
Dodge Ram 3500 DAMPER-CRANKSHAFT
Part Number: 53020229
Product Specifications
- Other Name: DAMPER, Vibration; Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001 Dodge Ram 3500 | Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, Regular Cab Chassis 2WD, Regular Cab Chassis 4WD
- 1999 Dodge Ram 3500 | Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, Regular Cab Chassis 2WD, Regular Cab Chassis 4WD
View related parts
Dodge Ram 3500 Damper Crankshaft
Part Number: 53021303AA
Product Specifications
- Other Name: Crankshaft Damper, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Ram 3500 | SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 8 Cyl 5.7L
View related parts
Dodge Ram 3500 DAMPER-CRANKSHAFT
Part Number: 53020689AB
$129.72 MSRP: $193.00
You Save: $63.28 (33%)
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Ram 3500 | SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD
View related parts
Dodge Ram 3500 DAMPER-CRANKSHAFT
Part Number: 53021284AA
Product Specifications
- Other Name: DAMPER Crankshaft; Pulley, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2003 Dodge Ram 3500 | Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, Regular Cab Chassis 2WD, Regular Cab Chassis 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 8 Cyl 5.9L
View related parts
Dodge Ram 3500 DAMPER-CRANKSHAFT
Part Number: 5245110
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Ram 3500 | SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD
View related parts
Dodge Ram 3500 Pulley-Crankshaft
Part Number: 53010222
Product Specifications
- Other Name: PULLEY Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2001 Dodge Ram 3500 | 3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD, Club Cab 8FT BOX 2WD, Club Cab 8FT BOX 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, Regular Cab 8FT BOX 2WD, Regular Cab 8FT BOX 4WD, Regular Cab Chassis 2WD, Regular Cab Chassis 4WD | 10 Cyl 8.0L, 8 Cyl 5.9L
View related parts
Dodge Ram 3500 Damper, W/Pulley, Vibration
Part Number: 53020776
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2003 Dodge Ram 3500 | 3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD, Club Cab 8FT BOX 2WD, Club Cab 8FT BOX 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, Regular Cab 8FT BOX 2WD, Regular Cab 8FT BOX 4WD, Regular Cab Chassis 2WD, Regular Cab Chassis 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 10 Cyl 8.0L
View related parts
Dodge Ram 3500 DAMPER-CRANKSHAFT
Part Number: 5086735AA
Product Specifications
- Other Name: DAMPER Crankshaft; Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 3500 | Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Laramie Regular Cab 2WD, Laramie Regular Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 6 Cyl 5.9L Diesel

Dodge Ram 3500 Crankshaft Pulley

Don't let the name fool you the proper name is the Performance Crankshaft Pulley in Dodge Ram 3500 vehicles and this component is vital in transmitting power from the engine to other parts like the power steering pump, air conditioning compressor, and the alternator. The Performance Crankshaft Pulley manages to affect the overall efficiency and performance by catching torque right from the crankshaft of the engine. Furthermore, it plays the role of a harmonic balancer which helps in reducing the vibrations recurring in the engines for better-running. Dodge Ram 3500 models of over the years have used different Performance Crankshaft Pulley styles with specific Performance Crankshaft Pulley being of specific design and relevant in its performance and its lightweight nature. These variations may change in materials used, and how the structure is symmetrical or asymmetrical, and thus may have different efficiencies in power transmission and in suppression of vibrations.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ram 3500 Crankshaft Pulley at great affordable prices. Moreover, all genuine Dodge Ram 3500 Crankshaft Pulley come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Ram 3500 Crankshaft Pulley Parts Questions & Experts Answers

DAMPER-CRANKSHAFT
53022083AA
Q: How to remove and install a crankshaft pulley and Harmonic Balancer in 3.7L V6 and 4.7L V8 engine on Dodge Ram 3500?
A: Disconnect the battery cable from its negative terminal. Next, remove the top radiator hose after draining some coolant. Remove the fans and shroud jointly as one unit. Store the fan assembly in an upright position so that you do not ruin the bearing. Take off the drive belt. Use a strap wrench together with a breaker bar to take out crankshaft pulley's center bolt. Using a puller with three hooks, and making sure that they only touch the hub of pulley, pull off the damper from crankshaft. Check if there are any grooves on the surface of pulley's hub and install new one if found necessary. Lubricate pulley's hub using clean engine oil and align key on crankshaft with slot in pulley.Installation tool for vibration damper can be used to push this onto crankshaft.Pull it over by using vibration damper installation tool until it seats correctly.Push it on crankshaft then finish pulling down by using vibration damper installation tool.Finally, tighten the fixing bolts of the damper on the crankshaft to the specified torque.Remaining part of installation is reverse of removal.