×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Ramcharger Distributor Cap
Ignition Distributor Cap- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Distributor Caps found
Dodge Ramcharger Distributor Cap
The Distributor Cap in Dodge Ramcharger motor vehicles is having the basic functions of the ignition system by having the duty of channeling energy from the ignition coils to the engine for the purpose of igniting fuel. It shields interiors of the distributor and guarantees that high voltage electricity reaches the plugs in the correct sequence. The cap also has tabs that are in line with each engine cylinder with differences extending to dual spark plug per cylinder in some models. In the Dodge Ramcharger vehicles that have been produced over the years there are different styles of distributor caps this has implication on installation and performance. Several problems that people report their vehicles to the workshop include hard starting, shaking excessively, stalling, or backfiring, which are potential signs of a faulty Distributor Cap, and which is likely to be worst in cold winter season. If it comes to Dodge Ramcharger vehicles, one would do well to take care to perform proper maintenance and replace the Distributor Cap from time to time.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ramcharger Distributor Cap at great affordable prices. Moreover, all genuine Dodge Ramcharger Distributor Cap come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Ramcharger Distributor Cap Parts Questions & Experts Answers
- Q: How to check and replace Distributor Cap and Distributor Rotor on Dodge Ramcharger?A: The spark plug wires should be inspected as recommended by the car's service manual or each time new spark plugs are fixed on the engine; since it is recommended that the wires be lined in a correct sequence to ensure correct firing order of the engine. The plug wire must be disconnected from the spark plug using the removal tool or one must grab the rubber boot and twist it slightly then pull it which will separate the wire from the plug wire. After that, look for signs of corrosion inside the boot which is formed as a white powdery substance and then check the proper connection between the wire and the spark plug boot; if the connection is loose, then using the pliers gently apply pressure to the metal connector present in the boot to make it fit tightly. Rub the whole length of the wire with a piece of clean cloth to remove dirt and grease and to identify the burned, cracked or other defective parts of the conductor without the expenditure of bending force which can cause the breaking of the conductor. Remove the wire from the distributor, grabbing only the rubber boot and look for corrosion and tight connection before the wire is fixed. Inspect the rest of the spark plug wires to see if they are well connected to the distributor as well as at the spark plug end. If new sparkplug wires are required then get a set appropriate to the engine type; they are usually available pre-fitted with rubber boots and should be fitted one to a set and in the correct firing order to avoid confusion. Furthermore, it is necessary to inspect the distributor cap and the rotor for wears that may include cracks, carbon tracks and worn or loose electrical contact, which one may replace with new spare parts, or is customary to fit new cap and rotor if you have fitted new spark plug wires, but moving the wires from the old cap to new one in correct firing order.
