Genuine Dodge Ramcharger Door Latch Assembly

Door Latch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Door Latch Assembly found

  • Dodge Ramcharger Door Latch Assembly - 4217705
    Diagram for Dodge Ramcharger Door Latch Assembly - 4217705
    View related parts
    Product Specifications
    • Other Name: Lock, Front Door; Latch, Lock
    • Position: Driver Side
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 1984-1985 Dodge Ramcharger | 6 Cyl 3.7L, 8 Cyl 5.2L, 8 Cyl 5.9L

Dodge Ramcharger Door Latch Assembly

Door Latch Assembly on Dodge Ramcharger vehicles plays the important role of the car's locks that keep the doors of a car closed and guard the interior from intruders. This assembly can incorporate any form of locking mechanism which can be either fixed automatically or by command from within the compartment and depending on the design, the doors can be locked from within or from a central point. Throughout the Dodge Ramcharger models, there are various models of Door Latch Assembly that has been applied in the car with varying styles focusing on the durability and simplicity in handling when opened. However, over time, these assemblies could need replacement because one may wear out the other through such problems as jamming of outer door handles, sticking mechanisms or problems with the door lock button. It is thus important that the Door Latch Assembly of the Dodge Ramcharger receives constant maintenance so as to meet the vehicle's safety and operability needs in future.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ramcharger Door Latch Assembly at great affordable prices. Moreover, all genuine Dodge Ramcharger Door Latch Assembly come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Ramcharger Door Latch Assembly Parts Questions & Experts Answers

  • Q: How do you remove and install the door handle and latch assembly on Dodge Ramcharger?
    A: Remove the door trim panel and armrest if applicable, along with the door access panel. Working through the access hole, take out the nut and screw that retain the handle. Disconnect the handle linkage from the lock assembly, then remove the outside handle. Installation follows the reverse order of removal, and it's important to check the handle operation before putting the trim and access panels back. If the linkage needs adjustment, loosen the door latch lever adjusting screw while accessing it through the inch access hole in the latch face, then cycle the outside handle push button and tighten the adjusting screw. When installing the latch linkage on the right side, ensure the part with the paint mark if applicable is positioned towards the bottom of the door, while on the left side, it should be towards the top. To remove the latch, take out the mounting screws from the outside end panel of the door and then withdraw the latch through the access hole. Installation is again the reverse of removal.

Related Dodge Ramcharger Parts