How do you remove and replace a rear shock absorber on Dodge Ramcharger?

Remove only one shock absorber at a time. Begin by raising the vehicle and positioning jackstands securely under the right or left frame rail, just forward of the front spring mount and just to the rear of the rear spring mount. Working from the side supported by the jackstand, take off the nut and washer from the lower shock absorber stud, which typically involves removing the lower mounting bolt from the rear shock absorber. Next, remove the upper shock mounting bolt and take out the shock absorber. After replacing or reinstalling the first shock absorber, repeat the steps for the other side. Finally, tighten the mounting bolts to the specified torque.

Genuine Dodge Ramcharger Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Shock Absorbers found

View related parts
Dodge Ramcharger Abs & BUSHING Y Front
Part Number: 4443480
Product Specifications
- Other Name: Shock ABSORBER, w/Std. w/3000,3300 Lb. Axle (1990); Shock Absorber
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1988-1993 Dodge Ramcharger | Sport Utility 2WD | 6 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L, All Engines
View related parts
Dodge Ramcharger SHOCKFRONT
Part Number: 4443482
Product Specifications
- Other Name: Shock Absorber
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1988-1993 Dodge Ramcharger | Sport Utility 2WD | 6 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L, All Engines
View related parts
Dodge Ramcharger Shock Absorber, Front
Part Number: G0060043
Product Specifications
- Other Name: Shock Absorber
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1986-1989 Dodge Ramcharger | 6 Cyl 3.7L, 6 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L, All Engines
View related parts
Dodge Ramcharger SHOCK/ABS-Rear (D-124) Std
Part Number: 52037512
Product Specifications
- Other Name: Shock ABSORBER, Rear Std. w/1.00 Dia.(1990)
- Replaced by: 4713242
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1993 Dodge Ramcharger | Sport Utility 2WD | 6 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L

Dodge Ramcharger Shock Absorber

The Shock Absorber is an essential component of the Dodge Ramcharger cars whose main purpose is to reduce heavy bouncing and enhance the comfort of the ride. By converting kinetic energy into heat through hydraulic mechanism the Shock Absorber reduces shock impulses thereby improving its handling capabilities on rough surfaces. For many years, Dodge Ramcharger has used Shock Absorbers with features such as twin-tube and mono-tube. Twin-tube shocks are often used and are relatively simple in construction, and can be 'gas' for additional toughness. On the other hand, shocks that come in mono-tube design are better at shedding heat and also can be fitted in multiple positions. Additional settings such as the Position Sensitive Damping (PSD) and Acceleration Sensitive Damping (ASD) take the control to the next level to enhance the ride depending on the conditions as this video shows the progress of the Dodge Ramcharger suspension system.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ramcharger Shock Absorber at great affordable prices. Moreover, all genuine Dodge Ramcharger Shock Absorber come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Ramcharger Shock Absorber Parts Questions & Experts Answers

SHOCK/ABS-Rear (D-124) Std
52037512
Q: How do you remove and replace a rear shock absorber on Dodge Ramcharger?
A: Remove only one shock absorber at a time. Begin by raising the vehicle and positioning jackstands securely under the right or left frame rail, just forward of the front spring mount and just to the rear of the rear spring mount. Working from the side supported by the jackstand, take off the nut and washer from the lower shock absorber stud, which typically involves removing the lower mounting bolt from the rear shock absorber. Next, remove the upper shock mounting bolt and take out the shock absorber. After replacing or reinstalling the first shock absorber, repeat the steps for the other side. Finally, tighten the mounting bolts to the specified torque.