How do you remove and reinstall the door window regulator assembly on Dodge Ramcharger?

Remove the trim panel, followed by the inner and outer weatherstrips, and then take out the vent window assembly. Lower the glass until the regulator arm can be detached from the glass lift channel, and disengage the regulator arm from the channel. Next, remove the glass from the door. If the vehicle is equipped with a door-mounted stereo speaker, it should be removed to access the regulator. For vehicles with power windows, take out the down stop bumper bracket and lower it as far as possible. Remove the three regulator mounting bolts and lift the regulator out of the access hole; for later model vehicles with riveted regulator assemblies, use a 3/4-inch drill bit to drill out and remove the rivets. Reinstallation is the reverse of removal, utilizing a 3/4-20 x 1/2 bolt and nut for rivet-mounted regulators.

Genuine Dodge Ramcharger Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Window Regulators found

View related parts
Dodge Ramcharger Regulator Front Door Electric Wd
Part Number: 4354401
Product Specifications
- Other Name: Regulator, Electric; Regulator, Window Regulator
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1986-1993 Dodge Ramcharger | Sport Utility 2WD, Sport Utility 4WD | 6 Cyl 3.7L, 6 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L, All Engines
View related parts
Dodge Ramcharger Regulator, Electric
Part Number: 4467283
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1988-1993 Dodge Ramcharger | Sport Utility 2WD, Sport Utility 4WD | 6 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L, All Engines

Dodge Ramcharger Window Regulator

The Window Regulator in Dodge Ramcharger vehicles plays the general role of operating window control to facilitate upward and downward operation for the ease of the passengers. These regulators may be of electric and require the operation of an electric motor or that of a hand crank depending on the distinct make and model of the Dodge Ramcharger. Styles of Wind Regulators: Nowadays Dodge Ramcharger vehicles have used a scissor type Window Regulator and also cable type. Both types have their specific way of handling the windows and the scissor types will usually allow a more compact system while the cable types will give a polished system. Therefore, all our Window Regulators are built according to strict standards so that they can slide and operate just like the factory version of the vehicle. Fixing a bad Window Regulator in a Dodge Ramcharger returns comfort of making use of the window as it should be.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ramcharger Window Regulator at great affordable prices. Moreover, all genuine Dodge Ramcharger Window Regulator come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Ramcharger Window Regulator Parts Questions & Experts Answers

Regulator, Electric
4467283
Q: How do you remove and reinstall the door window regulator assembly on Dodge Ramcharger?
A: Remove the trim panel, followed by the inner and outer weatherstrips, and then take out the vent window assembly. Lower the glass until the regulator arm can be detached from the glass lift channel, and disengage the regulator arm from the channel. Next, remove the glass from the door. If the vehicle is equipped with a door-mounted stereo speaker, it should be removed to access the regulator. For vehicles with power windows, take out the down stop bumper bracket and lower it as far as possible. Remove the three regulator mounting bolts and lift the regulator out of the access hole; for later model vehicles with riveted regulator assemblies, use a 3/4-inch drill bit to drill out and remove the rivets. Reinstallation is the reverse of removal, utilizing a 3/4-20 x 1/2 bolt and nut for rivet-mounted regulators.