Other Name: Sensor Coolant Temperature; Coolant Temperature Sensor, Temperature Sensor
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following Vehicles:
2007-2017 Jeep Patriot | Base 4WD, Base FWD, Latitude 4WD, Latitude FWD, Latitude X 4WD, Latitude X FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD | 4 Cyl 2.0L, 4 Cyl 2.4L
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following Vehicles:
2007-2017 Jeep Patriot | Base 4WD, Base FWD, Latitude 4WD, Latitude FWD, Latitude X 4WD, Latitude X FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD | 4 Cyl 2.0L, 4 Cyl 2.4L
Q: How to Remove and Install the Engine Coolant Temperature Sensor?
A: For 2010 and earlier engines, Sensor 1 is located on the left end of the engine on the coolant adapter housing, while Sensor 2 is located on the right front side of the engine block near the knock sensor. For 2011 and later models, there is only one ECT sensor located on the left end of the engine on the coolant adapter housing. To remove the sensor, disconnect the electrical connector and unscrew it. Wrap the threads with Teflon tape before installing. Refill the cooling system.