How to Remove an Ignition Coil on Jeep Patriot?

If available, spray compressed air around the tops of the coils to ensure debris will not fall into the spark plug tube upon removal. Remove the engine cover. Disconnect the cable from the negative terminal of the battery. Disconnect the electrical connector from the ignition coil. Remove the bolt attaching the ignition coil to the valve cover. Grasp the ignition coil and twist off the spark plug. To reinstall, switch the removal steps going from the last step to the first step.

Genuine Jeep Patriot Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
Jeep Patriot Ignition Coil
Part Number: 4606824AC
$78.18 MSRP: $118.00
You Save: $39.82 (34%)
ADD TO CART
Product Specifications
- Other Name: Coil-Ignition
- Replaces: 4606824AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | Base 4WD, Base FWD, Latitude 4WD, Latitude FWD, Latitude X 4WD, Latitude X FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Jeep Patriot Ignition Coil Compatible
Part Number: 4606824AB
$54.45 MSRP: $118.00
You Save: $63.55 (54%)
ADD TO CART
Product Specifications
- Other Name: Coil-Ignition
- Replaced by: 4606824AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Jeep Patriot | Base 4WD, Base FWD, Latitude X 4WD, Latitude X FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD | 4 Cyl 2.0L, 4 Cyl 2.4L

Jeep Patriot Ignition Coil

The Ignition Coil on Jeep Patriot car models is an important part that is used in ignition system on the vehicle. Operating from the battery's low voltage output the ignition coil steps up the voltage level to generate a spark that can ignite the air/fuel charge inside the cylinders. This process includes primary and secondary uncovered copper wire coils between a core of iron and housed in a system. Based on the type of ignition system; the coil can be mounted on distributor cap and rotor or mounted directly on the spark plug. Malfunction of the ignition coil may cause no start condition or it probably cause a rough idle, poor performance, and fuel economy. Routine servicing is a critical factor when it comes to the functionality of the ignition coil of the Jeep Patriot automobiles.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Patriot Ignition Coil at great affordable prices. Moreover, all genuine Jeep Patriot Ignition Coil come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Patriot Ignition Coil Parts Questions & Experts Answers

Ignition Coil Compatible
4606824AB
Q: How to Remove an Ignition Coil on Jeep Patriot?
A: If available, spray compressed air around the tops of the coils to ensure debris will not fall into the spark plug tube upon removal. Remove the engine cover. Disconnect the cable from the negative terminal of the battery. Disconnect the electrical connector from the ignition coil. Remove the bolt attaching the ignition coil to the valve cover. Grasp the ignition coil and twist off the spark plug. To reinstall, switch the removal steps going from the last step to the first step.