×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Jeep Wagoneer Coil Springs
Strut Spring- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
83 Coil Springs found
| Page 1 of 5 |Next >
1-20 of 83 Results
Jeep Wagoneer Coil Springs
Coil Springs found in the Jeep Wagoneer automobiles are responsible for the bearing of the load of the car as well as cushioning bumps in the roads. The indications of having worn/broken coil springs include; SAGGING, BOTTOMING OUT and abnormal tire wear. Ride height and quality can restored on the vehicle by replacing the springs and the main choices include OEM spec, reproduction springs, variable rate, or cargo coils in case of the extra heavy loads. Linear rate, progressive and the dual rate coil springs vary in stiffness and length of compression to enhance the handling of the car and eliminate bottoming out. Nitrogen filled coilovers and height adjustable springs help one get choices for refining the touches of the ride. River: adjustable coilovers and height adjustable springs will accommodate situations where one needs only tweaks to the current lowering kit.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Wagoneer Coil Springs at great affordable prices. Moreover, all genuine Jeep Wagoneer Coil Springs come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Wagoneer Coil Springs Parts Questions & Experts Answers
- Q: How do you remove the Coil Springs on Jeep Wagoneer?A: To remove the front wheel, loosen lug nuts and raise the vehicle. Disconnect the front driveshaft and support the axle assembly with a jack. Unbolt the lower suspension arms, stabilizer bar links, and shock absorbers. Disconnect the Track Bar and separate the steering link from the Pitman Arm. Lower the axle, remove the spring retainer and spring. Check and replace the spring if damaged. To install, position the spring on the axle, secure it, and raise the axle. Connect the suspension arms, center link, track bar, stabilizer bar links, shock absorbers, and driveshaft. Install the wheels, lower the vehicle, and tighten the lug nuts.
