Chrysler 5272612AJ ABSORBER-Suspension

You can Select Your Vehicle to check if 5272612AJ fits your vehicle.

To disassemble the strut and spring assembly, you need to mount the strut clevis bracket portion in a vise and mark the components for reassembly. Then, install a spring compressor on the spring and compress it to relieve pressure from the upper mount. While holding the damper shaft, loosen the shaft nut with a socket. Remove the nut and upper mount, inspecting the pivot bearing and upper spring seat for damage. Lift the compressed spring from the assembly and remove the dust boot from the damper shaft. Slide the rubber bumper off the damper shaft and check the lower spring isolator for damage.

Install the shock absorber/coil spring assembly.

The wheels need to be removed to access and remove the strut assembly.

After removing the shock absorber upper mounting bolts, the shock absorber assembly should be removed from the vehicle.