Make sure this part fits

Chrysler 68002123AA Suspension Control Arm Front Upper, Front

2007-2008 Chrysler 300 68002123AA

Customer Questions & Expert Answers (9)
Mopar 68002123AA Suspension Control Arm Front Upper, Front
  • Part Description
    Arm Control Lower
  • Position
    Front Upper
  • Replaced By
    68002123AC
  • Manufacturer
    Mopar
Make sure this part fits
$144.02 MSRP: $318.00
You Save: $173.98 (55%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number68002123AA
    Part DescriptionArm Control Lower
    Item Dimensions3.1 x 4.2 x 16.1 inches
    Item Weight6.70 Pounds
    PositionFront Upper
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerMopar
    SKU68002123AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2008 Chrysler 3006 Cyl 2.7L, 8 Cyl 5.7L, 8 Cyl 6.1LBase RWD, C RWD, C SRT8 RWD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68002123AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What is needed to separate the balljoint from the lower control arm for the 2005 Chrysler 300? Posted by Customer
    A:
    A special tool is needed to separate the balljoint from the lower control arm.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after the installation for the 2014 Dodge Challenger? Posted by Customer
    A:
    Follow the removal steps in reverse, using a new balljoint stud nut and ensuring all fasteners are tightened to the specified torque values.
    Posted by MoparPartsGiant Specialist
    Q:
    What special tool is needed to separate the balljoint from the steering knuckle for the 2006 Chrysler 300? Posted by Customer
    A:
    A balljoint removal tool, which can be found at most auto parts stores.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you access the lower control arm-to-subframe mounting bolt for the 2009 Dodge Charger? Posted by Customer
    A:
    Remove the stabilizer bar brackets to access the lower control arm-to-subframe mounting bolt.
    Posted by MoparPartsGiant Specialist
    Q:
    What steps are needed to install the upper control arm for the 2006 Dodge Charger? Posted by Customer
    A:
    Use a new balljoint stud nut and tighten all fasteners. Raise the lower control arm with a floor jack to simulate normal ride height before tightening the upper control arm mounting nuts at the shock tower. Install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts. Finally, have the front end alignment checked and adjusted if necessary.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after installing the wheel for the 2017 Dodge Challenger? Posted by Customer
    A:
    Lower the vehicle and tighten the lug nuts to the appropriate torque, followed by checking and adjusting the front end alignment if necessary.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you install the lower control arm for the 2008 Dodge Magnum? Posted by Customer
    A:
    Use a new balljoint stud nut and tighten all fasteners. Raise the lower control arm with a floor jack to simulate normal ride height before tightening the lower control arm mounting nut and the lower shock absorber mounting fasteners. Install the wheel, lower the vehicle, and tighten the lug nuts. Finally, have the front end alignment checked and adjusted if necessary.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What special tool is needed to separate the balljoint from the steering knuckle for the 2007 Dodge Magnum? Posted by Customer
    A:
    A balljoint removal tool, which can be found at most auto parts stores.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68002123AA, the Right Choice

To ensure reliability, purchase Mopar part # 68002123AA Suspension Control Arm Front Upper, Front. It is sometimes referred to as Chrysler Control Arm. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68002123AA Suspension Control Arm Front Upper, Front. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly