Chrysler 56029129AA Ignition Coil

You can Select Your Vehicle to check if 56029129AA fits your vehicle.

Try swapping it with an adjacent coil.

The first step is to dampen a cloth and use it to clean the coils.

Start by removing the ignition coil and cleaning the outer case for any damage. Clean the coil primary terminals and check for corrosion on the coil tower terminal, cleaning it with a wire brush if necessary. Use an ohmmeter to measure the coil primary resistance by attaching the leads to the two terminals of the connector. Compare the measured resistance to the specified range and replace the ignition coil if it falls outside the range. To check the coil secondary resistance, connect one ohmmeter lead to the positive terminal of the connector and the other lead to the high-tension terminal. Compare the measured resistance to the specified range and replace the ignition coil if necessary. If the primary and secondary resistance values are within specification but the coil is still misfiring or causing trouble codes, try swapping it with an adjacent coil. If the issue persists, consult a professional for further testing.