Make sure this part fits

Chrysler 2AMC3586AA Condenser And Transmission Cooler

2008-2012 Chrysler 2AMC3586AA

Customer Questions & Expert Answers (5)
Mopar 2AMC3586AA Condenser And Transmission Cooler
  • Part Description
    Cooler Condenser and Trans Cooler Note:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number2AMC3586AA
    Part DescriptionCooler Condenser and Trans Cooler Note:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab
    Item Dimensions27.0 x 16.3 x 3.1 inches
    Item Weight6.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU2AMC3586AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2012 Chrysler 2004 Cyl 2.4L, 6 Cyl 3.6LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan
    2008-2010 Chrysler Sebring4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck ? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 2AMC3586AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the condenser for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Discharge and recover the refrigerant, disconnect the negative battery cable, remove the radiator support brace, and tilt the radiator rearward. Remove the nut retaining the air conditioning lines, disconnect the refrigerant lines, and plug all open fittings. On 2008 and later models, remove the air conditioning condenser connecting line-to-radiator mounting bolts and the connecting line. Remove the mounting bolts securing the lower condenser bracket to the radiator and disconnect the automatic transaxle cooler lines. Carefully pull up to release the condenser from the lower clips and remove it from the vehicle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    How do you remove the condenser for the 2010 Dodge Avenger? Posted by Customer
    A:
    Discharge and recover the refrigerant, disconnect the negative battery cable, remove the radiator support brace, and tilt the radiator rearward. Remove the nut retaining the air conditioning lines, disconnect the refrigerant lines, and plug all open fittings. On 2008 and later models, remove the air conditioning condenser connecting line-to-radiator mounting bolts and the connecting line. Remove the mounting bolts securing the lower condenser bracket to the radiator and disconnect the automatic transaxle cooler lines. Carefully pull up to release the condenser from the lower clips and remove it from the vehicle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What should be done when replacing entire components for the 2016 Chrysler 200? Posted by Customer
    A:
    Additional refrigerant oil must be added equal to the amount that is removed with the component being replaced. Read the label on the oil container to verify compatibility with the R-134a or R-1234yf system before adding any. If the condenser is being replaced due to damage, the receiver-drier should also be replaced.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What should be done when installing a new condenser for the 2007 Jeep Compass? Posted by Customer
    A:
    Add 0.3-ounce (10 ml) of refrigerant oil to the replacement. Installation is the reverse of removal. Make certain to fully seat the condenser into the mounting clips and retainers. Install new O-rings onto the line fittings and lightly coat them with the proper refrigerant oil. Have the system evacuated, recharged and leak tested by the shop that discharged.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar A/C Condenser
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 2AMC3586AA, the Right Choice

To ensure reliability, purchase Mopar part # 2AMC3586AA Condenser And Transmission Cooler. It is sometimes referred to as Chrysler A/C Condenser. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 200, Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 2AMC3586AA Condenser And Transmission Cooler. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly