Make sure this part fits

Chrysler 68141353AA Head-Cylinder

2011-2012 Chrysler 68141353AA

Customer Questions & Expert Answers (20)
Mopar 68141353AA Head-Cylinder
  • Part Description
    Head Assembly Engine Cylinder
  • Replaced By
    68141353AC
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number68141353AA
    Part DescriptionHead Assembly Engine Cylinder
    Item Dimensions9.2 x 12.8 x 21.2 inches
    Item Weight39.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU68141353AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2012 Chrysler 2006 Cyl 3.6LLimited Convertible, Limited Sedan, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan
    2011-2012 Chrysler 3006 Cyl 3.6LBase AWD, Base RWD, Limited AWD, Limited RWD, S V6 AWD, S V6 RWD
    2011 Chrysler Town & Country6 Cyl 3.6LGold, Limited, LX, Touring, Touring L
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68141353AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after loosening the cylinder head bolts for the 2011 Chrysler 200? Posted by Customer
    A:
    Lift the cylinder head off the engine block with the exhaust manifold attached, prying carefully if it is stuck.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the next step after removing the air filter housing and reservoirs for the 2017 Chrysler 200? Posted by Customer
    A:
    Remove the drivebelts and the intake manifold, covering the intake ports with duct tape.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What components should be removed after aligning the cam phaser arrows for the 2014 Chrysler 200? Posted by Customer
    A:
    Remove the timing chain, oil control valves, timing chain tensioner, chain guides, camshafts, rocker arms, and lash adjusters, keeping the rocker arms and lash adjusters in order.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing and organizing the valves and components for the 1995 Dodge Grand Caravan? Posted by Customer
    A:
    After removing and organizing the valves and components, thoroughly clean and inspect the head, completing any engine disassembly before starting the cleaning and inspection process.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the rear timing belt cover for the 2008 Dodge Avenger? Posted by Customer
    A:
    Take out the bolts securing the rear timing belt cover to the cylinder head without disturbing any other timing belt cover bolts.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the next step after checking the cylinder head for the 2009 Dodge Avenger? Posted by Customer
    A:
    Install the components that were removed from the head, position the new cylinder head gasket over the dowel pins on the block, and carefully set the head over the dowels without disturbing the gasket.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be done after loosening the cylinder head bolts for the 2012 Dodge Avenger? Posted by Customer
    A:
    Lift the cylinder head off the block, using a wood block and hammer if necessary, and avoid damaging the surfaces.
    Posted by MoparPartsGiant Specialist
    Q:
    After removing the timing chain and sprockets, what is the next step for the 2013 Dodge Challenger? Posted by Customer
    A:
    Remove the camshafts from the cylinder head, followed by the rocker arms and hydraulic lash adjusters, ensuring to label and store them for reinstallation on the same valves.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for removing the camshaft for the 2017 Dodge Challenger? Posted by Customer
    A:
    Remove the camshaft thrust plate from the rear of the head and slide the camshaft back approximately 3 - 1/2 inches to allow for the removal of the sprocket and bolt.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What is the final step after installing the cylinder head for the 2013 Dodge Challenger? Posted by Customer
    A:
    Follow the reverse order for reinstallation of the remaining components, change the engine oil and filter, refill the cooling system, start the engine, and check for leaks and proper operation.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for tightening the bolts during installation for the 2011 Chrysler 200? Posted by Customer
    A:
    Carefully position the head on the block without disturbing the gasket, then tighten the bolts in the recommended sequence to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the camshaft bearing caps and lifters for the 2014 Dodge Avenger? Posted by Customer
    A:
    Remove the camshaft bearing caps, camshafts, and lifters, storing the lifters for reinstallation in their original locations.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the head be placed after removal for the 1999 Dodge Grand Caravan? Posted by Customer
    A:
    Place the head on blocks of wood to protect the gasket surfaces.
    Posted by MoparPartsGiant Specialist
    Q:
    How can the squareness of each spring be checked for the 2014 Dodge Grand Caravan? Posted by Customer
    A:
    Stand each spring on a flat surface to check for squareness.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the installed height exceeds specified limits for the 1996 Dodge Grand Caravan? Posted by Customer
    A:
    If the height exceeds specified limits, shims can be added under the springs to correct it, but do not shim the springs to the point where the installed height is less than specified.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in the procedure for the 2009 Dodge Grand Caravan? Posted by Customer
    A:
    Position the engine at TDC (Top Dead Center) on the compression stroke for the number 1 cylinder and drain the engine coolant.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the recommended method for cleaning rocker arm parts for the 2008 Dodge Grand Caravan? Posted by Customer
    A:
    The rocker arm parts should be cleaned with solvent and dried thoroughly, ensuring they are not mixed up, while compressed air can help clean out the oil passages.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be disconnected from the battery for the 2020 Dodge Grand Caravan? Posted by Customer
    A:
    The negative cable should be disconnected from the battery.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What components should be removed after the exhaust manifold for the 2011 Dodge Challenger? Posted by Customer
    A:
    Next, remove the valve covers, rocker arms, and pushrods, keeping all parts organized for reinstallation.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68141353AA, the Right Choice

To ensure reliability, purchase Mopar part # 68141353AA Head-Cylinder. It is sometimes referred to as Chrysler Cylinder Head. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 200, 300, Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68141353AA Head-Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly