Make sure this part fits

Chrysler R3620113AA Head&VALV-Cylinder

2011 Chrysler R3620113AA

Customer Questions & Expert Answers (20)
Mopar R3620113AA Head&VALV-Cylinder
  • Part Description
    Head&VALV-Cylinder
  • Manufacturer
    Mopar
Make sure this part fits
$686.24 MSRP: $835.00
You Save: $148.76 (18%)
Core Charge: $150.00
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part NumberR3620113AA
    Part DescriptionHead&VALV-Cylinder
    Item Dimensions20.6 x 12.5 x 10.2 inches
    Item Weight34.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKUR3620113AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011 Chrysler 2006 Cyl 3.6LLimited Convertible, Limited Sedan, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan
    2011 Chrysler 3006 Cyl 3.6LBase RWD, Limited RWD
    2011 Chrysler Town & Country6 Cyl 3.6LGold, Limited, LX, Touring, Touring L
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if R3620113AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after loosening the cylinder head bolts for the 2009 Dodge Avenger? Posted by Customer
    A:
    Lift the cylinder head off the block, using a wood block and hammer if necessary, and avoid damaging the surfaces.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if there's oil on the mating surfaces for the 2013 Dodge Avenger? Posted by Customer
    A:
    If there's oil on the mating surfaces when the head is installed, the gasket may not seal correctly, leading to leaks.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    How should the new gasket be positioned for the 2016 Chrysler 200? Posted by Customer
    A:
    Position the new gasket over the dowel pins and carefully place the cylinder head on the engine block.
    Posted by MoparPartsGiant Specialist
    Q:
    What additional step is required for the 2012 Dodge Avenger? Posted by Customer
    A:
    Remove the WAA assembly.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you relieve the fuel system pressure for the 2010 Dodge Avenger? Posted by Customer
    A:
    Start by relieving the fuel system pressure and disconnecting the negative battery cable from the remote ground terminal.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the exhaust manifold(s) for the 2009 Dodge Challenger? Posted by Customer
    A:
    Remove the exhaust manifold(s) from the cylinder head(s). Note that on 2015 and later Challenger models with 5.7L engines and all models with the 6.4L engine, the exhaust manifolds can only be removed after the cylinder head has been detached.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the cylinder head bolts be loosened for the 2017 Chrysler 200? Posted by Customer
    A:
    Loosen the cylinder head bolts in reverse of the tightening sequence until they can be removed by hand, taking notes on their locations.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    Which components need to be removed next for the 2010 Dodge Challenger? Posted by Customer
    A:
    Remove the drivebelt, air filter housing, and resonator, then disconnect all wires and vacuum hoses from the intake manifolds and cylinder heads, labeling them for reinstallation.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be noted about the camshaft sprocket bolts for the 2008 Dodge Challenger? Posted by Customer
    A:
    Use new camshaft sprocket bolts as the left and right sprocket bolts are not interchangeable.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    How do you support the engine during this procedure for the 2011 Chrysler 200? Posted by Customer
    A:
    Support the engine with an engine hoist and remove the crankshaft pulley.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the head bolts be installed for the 2011 Chrysler 200? Posted by Customer
    A:
    Install the bolts in their original locations and tighten them finger tight, then tighten all the bolts in several steps, following the proper sequence to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in preparing the cylinder head(s) during an engine overhaul for the 2019 Dodge Grand Caravan? Posted by Customer
    A:
    The first step is to thoroughly clean the cylinder head(s) and related valve train components, followed by a detailed inspection to determine the necessary valve service work.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be checked if resistance is felt when removing the head for the 1991 Dodge Grand Caravan? Posted by Customer
    A:
    Check for overlooked head bolts and use a hammer and wood block to break the gasket seal, being cautious of locating dowels.
    Posted by MoparPartsGiant Specialist
    Q:
    How can the squareness of each spring be checked for the 2009 Dodge Grand Caravan? Posted by Customer
    A:
    Stand each spring on a flat surface to check for squareness.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done to the mating surfaces of the cylinder head and block before installation for the 2014 Dodge Grand Caravan? Posted by Customer
    A:
    The mating surfaces must be perfectly clean; use a gasket scraper to remove all traces of carbon and old gasket material, then clean with lacquer thinner or acetone.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be done with the head bolt holes for the 2017 Dodge Challenger? Posted by Customer
    A:
    Chase the threads in the head bolt holes with a tap of the correct size and clean with compressed air.
    Posted by MoparPartsGiant Specialist
    Q:
    What is commonly available for most engines at dealerships and auto parts stores for the 1992 Dodge Grand Caravan? Posted by Customer
    A:
    New and rebuilt cylinder heads are commonly available for most engines at dealerships and auto parts stores.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be avoided during the installation of valve seals for the 2014 Dodge Grand Caravan? Posted by Customer
    A:
    Avoid twisting or cocking the seals during installation to ensure proper sealing on the valve stems.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before starting the procedure for the 2017 Dodge Grand Caravan? Posted by Customer
    A:
    Allow the engine to cool completely.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part R3620113AA, the Right Choice

To ensure reliability, purchase Mopar part # R3620113AA Head&VALV-Cylinder. It is sometimes referred to as Chrysler Cylinder Head. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 200, 300, Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar R3620113AA Head&VALV-Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly