Make sure this part fits

Chrysler 4792184AG Intake Manifold

2009-2010 Chrysler 300 4792184AG

Customer Questions & Expert Answers (11)
Mopar 4792184AG Intake Manifold
  • Part Description
    Manifold-Intake
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4792184AG
    Part DescriptionManifold-Intake
    Item Dimensions29.3 x 6.1 x 5.4 inches
    Item Weight7.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4792184AG
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009-2010 Chrysler 3006 Cyl 3.5LC AWD, C RWD, Limited AWD, Limited RWD, S V6 RWD, Touring AWD, Touring Plus RWD, Touring RWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4792184AG fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the upper intake manifold for the 2009 Chrysler 300? Posted by Customer
    A:
    To remove the upper intake manifold, start by relieving the fuel system pressure and disconnecting the battery cable. Then, remove the air filter housing and label and disconnect the hoses and electrical connectors attached to the intake manifold and throttle body. Remove the bolts securing the EGR pipe and the brackets from the throttle body and upper intake manifold. Loosen the upper intake manifold bolts and lift the manifold from the engine. Clean the mounting surfaces and inspect the O-ring gasket. If it's in good condition, it can be reused. Install the gasket into the groove in the upper intake manifold and then install the manifold onto the lower intake manifold, tightening the bolts in a circular pattern.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the lower intake manifold for the 2005 Chrysler 300? Posted by Customer
    A:
    After removing the lower intake manifold, clean and inspect the sealing surfaces and gaskets, replacing them if needed.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How should the bolts be tightened for the 2013 Dodge Challenger? Posted by Customer
    A:
    Tighten the bolts in several steps to the specified torque, and complete the installation in reverse order of removal.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be checked on the upper intake manifold for the 2012 Dodge Challenger? Posted by Customer
    A:
    Check the condition of the rubber seals in each intake runner on the upper intake manifold and replace any damaged seals.
    Posted by MoparPartsGiant Specialist
    Q:
    What components should be removed after disconnecting the hoses for the 2007 Dodge Charger? Posted by Customer
    A:
    Remove the fuel rails and injectors.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after starting the engine for the 2008 Dodge Challenger? Posted by Customer
    A:
    Check for vacuum leaks at the intake manifold joints.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the upper intake manifold for the 2010 Dodge Charger? Posted by Customer
    A:
    To remove the upper intake manifold, start by relieving the fuel system pressure and disconnecting the battery cable. Then, remove the air filter housing and label and disconnect the hoses and electrical connectors attached to the intake manifold and throttle body. Remove the bolts securing the EGR pipe and the brackets from the throttle body and upper intake manifold. Loosen the upper intake manifold bolts and lift the manifold from the engine. Clean the mounting surfaces and inspect the O-ring gasket. If it's in good condition, it can be reused. Install the gasket into the groove in the upper intake manifold and then install the manifold onto the lower intake manifold, tightening the bolts in a circular pattern.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should you do to relieve the fuel system pressure before proceeding for the 2010 Chrysler 300? Posted by Customer
    A:
    Relieve the fuel system pressure.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the final step in the installation process for both the upper and lower intake manifolds for the 2007 Dodge Charger? Posted by Customer
    A:
    Finally, complete the remaining installation steps in reverse order and check for any leaks.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the steps to remove the upper intake manifold for the 2013 Dodge Challenger? Posted by Customer
    A:
    After that, remove the brackets from the throttle body and the right side of the upper intake manifold, loosen the upper intake manifold bolts starting with the outer bolts and working inward, and then lift the upper intake manifold from the engine.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4792184AG, the Right Choice

To ensure reliability, purchase Mopar part # 4792184AG Intake Manifold. It is sometimes referred to as Chrysler Intake Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4792184AG Intake Manifold. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly