Chrysler R5151016AD Power Steering Pump

You can Select Your Vehicle to check if R5151016AD fits your vehicle.

The first step is to disconnect the cable from the negative terminal of the battery. This is necessary to ensure safety and prevent electrical accidents during the procedure.

The first step is to disconnect the cable from the negative terminal of the battery. This is necessary to ensure safety and prevent electrical accidents during the procedure.

The power steering pump for the 2.7L engine is removed by detaching the tie-rod end from the steering knuckle, removing the balljoint nut, and separating the balljoint from the knuckle using tool 9360 or an equivalent tool. The knuckle is then lifted out of the control arm, and the driveaxle is pulled out of the knuckle. Afterward, the power steering pressure line is disconnected from the pump, and the pump mounting bracket bolt is removed. The other two pump bracket bolts are removed, and the pump and bracket are removed from the engine by rotating the pump so the pulley faces the engine. The pump will come out through the gap made when the half shaft was removed.