Make sure this part fits

Chrysler 56041018AC Sensor-Map

2004-2008 Chrysler 56041018AC

Customer Questions & Expert Answers (12)
Mopar 56041018AC Sensor-Map
  • Part Description
    Sensor Map
  • Replaced By
    56041018AD
  • Manufacturer
    Mopar
Make sure this part fits
$94.41 MSRP: $144.00
You Save: $49.59 (35%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number56041018AC
    Part DescriptionSensor Map
    Item Dimensions1.9 x 2.6 x 3.7 inches
    Item Weight0.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU56041018AC
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007 Chrysler 3008 Cyl 6.1LC SRT8 RWD
    2008 Chrysler Aspen8 Cyl 4.7LLimited 2WD, Limited 4WD
    2005 Chrysler Pacifica6 Cyl 3.8LBase FWD
    2004-2005 Chrysler Town & Country6 Cyl 3.3L, 6 Cyl 3.8LBase, EL, EX, Limited AWD, Limited FWD, LX FWD, LXi FWD, Touring AWD, Touring FWD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 56041018AC fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How to Remove and Install the MAP Sensor on Dodge Dakota? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal. For 3.7L V6 and 4.7L V8 engines, disconnect the electrical connector from the MAP sensor and remove the two mounting screws. For HEMI engines, disconnect the electrical connector by sliding the release lock and depressing the release tab. Inspect and replace the 0-ring if damaged. To install, place it in position, insert it into the mounting hole, and turn it clockwise.
    Posted by MoparPartsGiant Specialist
    Q:
    How to Remove and Install the MAP Sensor on Dodge Durango? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal. For 3.7L V6 and 4.7L V8 engines, disconnect the electrical connector from the MAP sensor and remove the two mounting screws. For HEMI engines, disconnect the electrical connector by sliding the release lock and depressing the release tab. Inspect and replace the 0-ring if damaged. To install, place it in position, insert it into the mounting hole, and turn it clockwise.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the MAP sensor for the 2005 Chrysler 300? Posted by Customer
    A:
    To remove it, first unlock and disconnect the electrical connector by pulling out the lock and depressing the release tab. Then, rotate the MAP sensor counterclockwise 1/4-turn and pull it straight up and out of the intake manifold.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    How do you install the MAP sensor for the 2004 Dodge Caravan? Posted by Customer
    A:
    To install, reverse the removal process.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    What does the accompanying illustration show for the 2004 Chrysler Town & Country? Posted by Customer
    A:
    The accompanying illustration shows the MAP sensor on a 3.8L V6 engine.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    Where is the MAP sensor located for the 2008 Dodge Charger? Posted by Customer
    A:
    The MAP sensor is located on top of the intake manifold.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    How is the camshaft reference sensor diagnosed for the 2018 Dodge Grand Caravan? Posted by Customer
    A:
    The camshaft reference sensor on the 3.3L and 3.8L engines requires a special factory tool (DRB-I) for diagnosis.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    How do you remove the MAP sensor for the 2005 Dodge Magnum? Posted by Customer
    A:
    Disconnect the electrical connector by pulling out the lock and depressing the release tab. Rotate the MAP sensor 1/4-turn counterclockwise and remove it from the intake manifold.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    What is the voltage signal range received by the PCM for the 2010 Jeep Liberty? Posted by Customer
    A:
    The voltage signal received by the PCM ranges from 0.5 volts at closed throttle (high vacuum) to 4.5 volts at wide-open throttle low vacuum.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    What is the voltage signal range received by the PCM for the 2008 Dodge Nitro? Posted by Customer
    A:
    The voltage signal received by the PCM ranges from 0.5 volts at closed throttle (high vacuum) to 4.5 volts at wide-open throttle low vacuum.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar MAP Sensor
    Q:
    How do you install the MAP sensor for the 2010 Jeep Grand Cherokee? Posted by Customer
    A:
    To install the MAP sensor, place it in position, insert it into the mounting hole in the intake manifold, and turn it clockwise. Finally, reverse the steps for installation.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar MAP Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 56041018AC, the Right Choice

To ensure reliability, purchase Mopar part # 56041018AC Sensor-Map. It is sometimes referred to as Chrysler MAP Sensor. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300, Pacifica, Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 56041018AC Sensor-Map. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly