Make sure this part fits

Jeep 68141352AD Head&Valve-Cylinder

2012-2018 Jeep 68141352AD

Customer Questions & Expert Answers (24)
Mopar 68141352AD Head&Valve-Cylinder
  • Part Description
    Head Cylinder With Valves
  • Replaces
    68141352AB, RL141352AC, 68141352AE, RL141352AD, RL141352AE, RL141352AB, 68141352AC
  • Manufacturer
    Mopar
Make sure this part fits
$609.17 MSRP: $1025.00
You Save: $415.83 (41%)
Core Charge: $150.00
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part Number68141352AD
    Part DescriptionHead Cylinder With Valves
    Other NamesCylinder Head
    Item Dimensions9.7 x 12.6 x 21.0 inches
    Item Weight38.00 Pounds
    ConditionNew
    Replaces68141352AB, RL141352AC, 68141352AE, RL141352AD, RL141352AE, RL141352AB, 68141352AC
    ManufacturerMopar
    SKU68141352AD
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2012-2015 Jeep Grand Cherokee6 Cyl 3.6LLaredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, Summit AWD, Summit RWD
    2012-2018 Jeep Wrangler6 Cyl 3.6LRubicon, Rubicon 4WD, Sahara, Sahara 4WD, Sport, Sport 4WD, Unlimited Rubicon, Unlimited Rubicon 4WD, Unlimited Sahara 4WD, Unlimited Sport 4WD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68141352AD fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be checked after starting the engine for the 2016 Chrysler 200? Posted by Customer
    A:
    Check for leaks and proper operation.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after reinstalling the timing chain and cover for the 2016 Chrysler 200? Posted by Customer
    A:
    Follow the reverse order for the remaining installation steps.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What steps should be taken regarding the head bolt holes for the 2011 Dodge Challenger? Posted by Customer
    A:
    Chase the threads in the head bolt holes and clean the bolts before positioning the new gaskets correctly over the dowels in the block.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step before beginning the procedure for the 2016 Chrysler 200? Posted by Customer
    A:
    The engine must be completely cool before beginning this procedure.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the power steering hose bracket for the 2011 Dodge Avenger? Posted by Customer
    A:
    Detach the power steering hose bracket bolt and secure the pump out of the way without disconnecting the hoses.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be removed first in the procedure for the 2011 Dodge Avenger? Posted by Customer
    A:
    First, remove the primary timing chain and sprockets.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    How do you support the engine during this procedure for the 2016 Chrysler 200? Posted by Customer
    A:
    Support the engine with an engine hoist and remove the crankshaft pulley.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the final step after installing the cylinder head for the 2017 Dodge Challenger? Posted by Customer
    A:
    Follow the reverse order for reinstallation of the remaining components, change the engine oil and filter, refill the cooling system, start the engine, and check for leaks and proper operation.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed after the power steering pump for the 2008 Dodge Avenger? Posted by Customer
    A:
    Remove the valve cover(s) and rocker arms and shafts.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new gasket be positioned for the 2013 Dodge Avenger? Posted by Customer
    A:
    Position the new gasket over the dowel pins and carefully place the cylinder head on the engine block.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done to store the cylinder head bolts for the 2017 Dodge Challenger? Posted by Customer
    A:
    Use a new head gasket to outline the cylinders and bolt pattern on a piece of cardboard, indicating the front of the engine and punching holes at the bolt locations for accurate storage.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What needs to be done for the rear cylinder head for the 1999 Dodge Grand Caravan? Posted by Customer
    A:
    Detach the heater hoses and brackets from the transaxle end of the head, remove the air cleaner housing from the engine compartment, and take out the alternator and bracket from the cylinder head.
    Posted by MoparPartsGiant Specialist
    Q:
    What components should be reinstalled after the head bolts for the 2017 Dodge Challenger? Posted by Customer
    A:
    Install the lash adjusters and rocker arms in the cylinder head, followed by the camshafts, and then reinstall the primary timing chain and sprockets.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing and organizing the valves and components for the 2018 Dodge Grand Caravan? Posted by Customer
    A:
    After removing and organizing the valves and components, thoroughly clean and inspect the head, completing any engine disassembly before starting the cleaning and inspection process.
    Posted by MoparPartsGiant Specialist
    Q:
    How should old gasket material and sealant be removed from the cylinder head for the 1998 Dodge Grand Caravan? Posted by Customer
    A:
    All traces of old gasket material and sealant should be carefully scraped off the head gasket, intake manifold, and exhaust manifold mating surfaces to avoid gouging the cylinder head. Special gasket removal solvents can be used for easier removal.
    Posted by MoparPartsGiant Specialist
    Q:
    What if the head was sent out for valve servicing for the 2015 Dodge Grand Caravan? Posted by Customer
    A:
    If the head was sent out for valve servicing, the valves and related components will already be in place, allowing you to start the reassembly procedure.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the valve components are found to be in poor condition for the 2015 Dodge Grand Caravan? Posted by Customer
    A:
    If worn beyond specified limits, reassemble the valves in the cylinder head.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the torque sequence for tightening the bolts for the 2008 Dodge Grand Caravan? Posted by Customer
    A:
    Tighten the bolts to 45 ft-lbs in the recommended sequence, then to 65 ft-lbs, and repeat for a double check.
    Posted by MoparPartsGiant Specialist
    Q:
    What precautions should be taken when lifting the head off the engine for the 2009 Dodge Grand Caravan? Posted by Customer
    A:
    Care should be taken not to pry between the head and block gasket mating surfaces to avoid damage; instead, pry against the casting protrusions on the sides of the cylinder head.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What preparations should be made before installing the cylinder head for the 2015 Ram 1500? Posted by Customer
    A:
    Clean the block and head mating surfaces thoroughly, checking for nicks and scratches. Check for warpage using a straightedge and feeler gauge. Clean the injector nozzle seats and the block deck surface, ensuring it's within specified limits. Chase the threads in the head bolt holes with a tap and die, and measure the head bolt lengths. If the bolts are stretched beyond the allowable length, replace them.
    Posted by MoparPartsGiant Specialist
    Q:
    How are the new cylinder heads installed for the 2013 Ram 1500? Posted by Customer
    A:
    Position the new gaskets correctly on the dowels in the block. Carefully place the heads on the block without disturbing the gaskets. Coat the head bolt threads with engine oil and install the bolts in their original locations. Tighten the bolts following the recommended sequence and torque specifications.
    Posted by MoparPartsGiant Specialist
    Q:
    What initial preparations should be made before attempting to remove the cylinder head for the 2017 Ram 1500? Posted by Customer
    A:
    Before removing the cylinder head, it's important to relieve the fuel system pressure, disconnect the battery, and drain the engine oil and coolant. Additionally, remove the drivebelt, idler pulleys, air filter housing, and intake manifolds.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the head bolts be tightened for the 2012 Ram 1500? Posted by Customer
    A:
    Bolts should be installed in their original locations, tightened finger-tight, and then tightened to the specified torque and angle of rotation, using an angle measurement gauge during the final tightening stages.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68141352AD, the Right Choice

To ensure reliability, purchase Mopar part # 68141352AD Head&Valve-Cylinder. It is sometimes referred to as Jeep Cylinder Head. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Jeep Grand Cherokee, Wrangler models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68141352AD Head&Valve-Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly