Make sure this part fits

Jeep 68227451AA Head&Valve-Cylinder

2014-2018 Jeep 68227451AA

Customer Questions & Expert Answers (24)
Mopar 68227451AA Head&Valve-Cylinder
  • Part Description
    Head Cylinder With Valves
  • Replaces
    RL227451AA
  • Manufacturer
    Mopar
Make sure this part fits
$1064.64 MSRP: $1155.00
You Save: $90.36 (8%)
Core Charge: $150.00
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part Number68227451AA
    Part DescriptionHead Cylinder With Valves
    Other NamesCylinder Head
    Item Dimensions9.3 x 13.1 x 20.8 inches
    Item Weight35.40 Pounds
    ConditionNew
    ReplacesRL227451AA
    ManufacturerMopar
    SKU68227451AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2014-2015 Jeep Grand Cherokee6 Cyl 3.6LLaredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, Summit AWD, Summit RWD
    2014-2018 Jeep Wrangler6 Cyl 3.6LRubicon, Rubicon 4WD, Sahara, Sahara 4WD, Sport, Sport 4WD, Unlimited Rubicon, Unlimited Rubicon 4WD, Unlimited Sahara 4WD, Unlimited Sport 4WD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68227451AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after installing the cylinder head for the 2014 Chrysler 200? Posted by Customer
    A:
    Install the rear timing belt cover-to-cylinder head bolts and tighten them as well.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the WT filter after removing the cylinder head for the 2008 Dodge Avenger? Posted by Customer
    A:
    Use needle nose pliers to take out the WT filter from the engine block and clean all old gasket material from the block and head, ensuring no debris falls into the engine.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for lifting the heads off the engine for the 2009 Dodge Challenger? Posted by Customer
    A:
    Lift the heads off the engine carefully, using a block of wood and a hammer if necessary, and store them on blocks of wood to protect the gasket sealing surfaces.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be checked on the block and head mating surfaces for the 2011 Chrysler 200? Posted by Customer
    A:
    Check the block and head mating surfaces for nicks, deep scratches, and other damage; slight damage can be removed with a file, while excessive damage may require machining.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be checked on the block and head mating surfaces for the 2016 Dodge Challenger? Posted by Customer
    A:
    Check for damage, using a file for slight damage and considering machining for excessive damage.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the next step after checking the cylinder head for the 2014 Dodge Avenger? Posted by Customer
    A:
    Install the components that were removed from the head, position the new cylinder head gasket over the dowel pins on the block, and carefully set the head over the dowels without disturbing the gasket.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    How should the new gasket and cylinder head be positioned for the 2017 Dodge Challenger? Posted by Customer
    A:
    Position the new gasket over the dowel pins, carefully place the cylinder head on the engine block, and install new cylinder head bolts, tightening them in the recommended sequence without applying additional oil to the threads.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed after the power steering pump for the 2010 Dodge Avenger? Posted by Customer
    A:
    Remove the valve cover(s) and rocker arms and shafts.
    Posted by MoparPartsGiant Specialist
    Q:
    What additional components need to be removed if working on the front cylinder head for the 2008 Dodge Avenger? Posted by Customer
    A:
    Remove the alternator, oil dipstick tube, air conditioning compressor, and disconnect the main engine harness connectors.
    Posted by MoparPartsGiant Specialist
    Q:
    What components should be removed after securing the power steering pump for the 2015 Chrysler 200? Posted by Customer
    A:
    Remove the exhaust manifold, ignition coils, and spark plugs, followed by the valve cover.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be removed for the rear cylinder head for the 2013 Chrysler 200? Posted by Customer
    A:
    Remove the power steering pump and heater core tube fasteners.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done to the coolant passages during the cleaning process for the 2008 Dodge Grand Caravan? Posted by Customer
    A:
    Built-up scale from the coolant passages must be removed, and a stiff wire brush should be run through various holes to eliminate any deposits.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done to the mating surfaces of the cylinder head and block before installation for the 1991 Dodge Grand Caravan? Posted by Customer
    A:
    The mating surfaces must be perfectly clean; use a gasket scraper to remove all traces of carbon and old gasket material, then clean with lacquer thinner or acetone.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be noted about the camshaft sprocket bolts for the 2015 Dodge Challenger? Posted by Customer
    A:
    Use new camshaft sprocket bolts as the left and right sprocket bolts are not interchangeable.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What does disassembly of a cylinder head involve for the 2020 Dodge Grand Caravan? Posted by Customer
    A:
    Disassembly involves removing the intake and exhaust valves along with related components. For 2.5L or 3.0L engines, the camshafts and housings must be removed first.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be inspected on each valve face for the 1993 Dodge Grand Caravan? Posted by Customer
    A:
    Look for uneven wear, deformation, cracks, pits, and burned areas.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for installing valve springs and keepers for the 1998 Dodge Grand Caravan? Posted by Customer
    A:
    Position the valve springs and shims, if used, over the valves, compress the springs with a valve spring compressor, and carefully install the keepers in the groove. Then slowly release the compressor to ensure the keepers seat properly. A small dab of grease can be applied to each keeper to hold it in place if necessary.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the mating surfaces be cleaned for the 2014 Dodge Grand Caravan? Posted by Customer
    A:
    Use a gasket scraper to eliminate carbon and old gasket material, then clean the surfaces with lacquer thinner or acetone.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing manifolds and moving the steering pump for the 2014 Ram 1500? Posted by Customer
    A:
    Take off the valve covers, rocker arms, and pushrods.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the intake manifold and timing components for the 2018 Ram 1500? Posted by Customer
    A:
    After that, raise and securely support the front of the vehicle and unbolt the exhaust pipes from the exhaust manifolds.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What are the remaining steps to complete the cylinder head installation for the 2018 Ram 1500? Posted by Customer
    A:
    Complete the remaining installation steps, which include changing the engine oil and filter, and refilling the cooling system. Finally, start the engine and check for leaks and proper operation.
    Posted by MoparPartsGiant Specialist
    Q:
    What preparations should be made before installing the cylinder head for the 2013 Ram 1500? Posted by Customer
    A:
    Clean the block and head mating surfaces thoroughly, checking for nicks and scratches. Check for warpage using a straightedge and feeler gauge. Clean the injector nozzle seats and the block deck surface, ensuring it's within specified limits. Chase the threads in the head bolt holes with a tap and die, and measure the head bolt lengths. If the bolts are stretched beyond the allowable length, replace them.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done when lifting the head(s) off the engine for the 2017 Dodge Grand Caravan? Posted by Customer
    A:
    Lift the head(s) off the engine carefully, avoiding prying between the head and block to prevent damage.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68227451AA, the Right Choice

To ensure reliability, purchase Mopar part # 68227451AA Head&Valve-Cylinder. It is sometimes referred to as Jeep Cylinder Head. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Jeep Grand Cherokee, Wrangler models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68227451AA Head&Valve-Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly